12-22-2019, 10:03 PM
|
#1 |
|
Join Date: Dec 2019
Posts: 12
|
Shineray 250
So I recently picked up a shineray 250 dirtbike, it is missing the bolt on the side of the jug opposite the spark plug. Without the bolt it makes a decent amount of racket when running and the (what I assume to be) cam plug pops out a bit and spins around. However I have tried a bolt from a different 250(taotao) and it doesn’t seem to thread into it. Is there something I’m missing and has anyone messed with this?
https://m.alibaba.com/product/607056...s-bicycle.html |
|
|
12-23-2019, 07:32 AM
|
#2 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,574
|
Welcome aboard! That's the Cam Follower Shaft. It doesn't screw into the cylinder. Apparently the pin that holds it in place has either sheared off or backed out. The slot in the heads is so you can turn it to line up the hole for the pin. See pictures below.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
12-27-2019, 12:23 AM
|
#3 |
|
Join Date: Dec 2019
Posts: 12
|
Ok. Thank you for the images that is a huge help. Looks like I’m going to be tearing into this one further.
|
|
|
|
|
|
 |
|
|
Linear Mode
