03-31-2016, 03:17 PM | #1 |
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Fed Ex just dropped off the Hawk Tach Cluster!!
Took me all of 20 minutes to test it out and IT WORKS! The Hawk also comes PRE-WIRED for gear indicator which this cluster has! The Green plug in front of the battery has 6 wires on the engine side and only 1 connected on the bike side which is the Neutral wire. The other 5 wires that are not connected are gears 1-5 confirmed with a milli-amp meter. Each gear shows .03 Milli-amps. As soon as i get to town this afternoon to source some smaller gauge wire i will hook that up as well to test. The tach connects to the Blue/White wire in the other plug coming from the engine in front of the battery. I used a Tap-Splice to hook that up. The wheel sending unit for the Speedometer is plug and play and the tire size is adjusted through the cluster itself. (haven't got that far yet.) The only glitch i see right now is the low fuel light stays on. If i can get this minor issue adjusted or just shut off in programming i should be able to have these shipped to me in about 2-3 weeks. I can do all of this through Pay-Pal for those interested. STAY TUNED!!!
|
|
|
|
|
|