honda cbr cdi on suzuki.

[N3xT s3Qill]

Theres a cheap suzuki gsf 400 bare motor I wanted to buy and throw my elecs and carbs off a honda cbr 400(rod bearings knocking)on to it I know the carbs will be ok its the cdi im not sure of.

The suzukis stroke is 40.5mm and the cbr is 42mm so im thinking it would just be a little retarded on timing the wirings the same 2 pins need to be swapped over they both have around the same output 58hp 13.500rpm-14000.

[humanbeing]

http://item.taobao.com/item.htm?id=4633691081 OR used CDI

[N3xT s3Qill]

Originally Posted by humanbeing

http://item.taobao.com/item.htm?id=4633691081 OR used CDI

I want to know if i can use the honda stuff just because its all here instead of waiting for a order from overseas theres some here in new zealand but theyre around $200 which is how much the motor is cheers anyway.

[humanbeing]

Originally Posted by N3xT s3Qill

I want to know if i can use the honda stuff just because its all here instead of waiting for a order from overseas theres some here in new zealand but theyre around $200 which is how much the motor is cheers anyway.

Compare tabs (tells when to fire) btw 2 flywheel. Similar pattern/ length = compatible