2018 KYMCO Spade

SamM · 11-05-2018, 09:37 PM

A few days ago, I ordered a new Klutch mini lathe. I’ve needed a lathe for a long time. This will make fabricating spacers and small parts much easier. The rear Grom Brembo caliper mount will need cut down to fit the Spade swingarm. The lathe will make doing this a simple process.

Today, I cut the Spade steering stem from its lower clamp. There is no going back now. I’ve already started cutting material for the new clamp spacers. The Brembo brake calipers and Braking wave rotors have arrived.

I’ll post progress pictures in a few days.

SamM

11-05-2018, 09:37 PM	#18
SamM Join Date: Feb 2007 Location: West Virginia Posts: 1,194	A few days ago, I ordered a new Klutch mini lathe. I’ve needed a lathe for a long time. This will make fabricating spacers and small parts much easier. The rear Grom Brembo caliper mount will need cut down to fit the Spade swingarm. The lathe will make doing this a simple process. Today, I cut the Spade steering stem from its lower clamp. There is no going back now. I’ve already started cutting material for the new clamp spacers. The Brembo brake calipers and Braking wave rotors have arrived. I’ll post progress pictures in a few days. SamM __________________ 2013 Jeep Wrangler Sahara MOAB 2005 BMW E53 X5 2011 Schutt Industries LTT-HC LQG trailer 2017 Coleman CT200U 1978 Yamaha SR500E 1979 Yamaha XS650 Special II
	2