new bashan asssembly woes

[fishman10]

This is probably my 7th china bike assembly ''',,,,,,but this one is fighting me the entire way ,,first im missing bolts ,,then no power at all''',,,,taillight didnt work ,,,,an the carb is messsed up ,only runs with choke on ,,so carb it has to come off tomorrow for a cleaning .ooh an if somone knows how to get rid of the alarm /security system ,,,,,,,,,,,,,that would be great!

[Azhule]

Here is one possible answer to your Alarm dilemma, worked on our Bashan

http://www.chinariders.net/showthread.php?t=18495

[fishman10]

Thx. If it's that simple ,that will be awesome ,, not sure why I can't search for things ,I try to open the search window after logging in an soon as I open it. The window disappears.

[BlackBike]

Originally Posted by fishman10

Thx. If it's that simple ,that will be awesome ,, not sure why I can't search for things ,I try to open the search window after logging in an soon as I open it. The window disappears.

Try using advanced search but I can't ever get it to work for my self either. Try google term with chinariders.net in the term

[hertz9753]

Originally Posted by BlackBike

Try using advanced search but I can't ever get it to work for my self either. Try google term with chinariders.net in the term

I entered your bike with the "Blaze" at the end and clicked on go in the search engine.

http://www.chinariders.net/search.php?searchid=698422

Are you guys using phones to search? I use a computer.

[Megadan]

Searching with a phone is kind of hit or miss. Every time I try it usually fails as you are describing it, but once in a blue moon it will work. On my computer it never has a problem.

[Wigwam Jones]

Most typical forum software is a bit hit or miss for internal searching. However, typically Google steps in to assist.

If you go to www.google.com and type this:

'site:www.chinariders.net bashan alarm'

You will get all messages from CN that contain the terms 'bashan' and 'alarm'. Of course one can enter any search terms one wishes.

[BlackBike]

Originally Posted by Wigwam Jones

Most typical forum software is a bit hit or miss for internal searching. However, typically Google steps in to assist.

If you go to www.google.com and type this:

'site:www.chinariders.net bashan alarm'

You will get all messages from CN that contain the terms 'bashan' and 'alarm'. Of course one can enter any search terms one wishes.

I use android tablet.

Wig...this is the easiest way to search

[fishman10]

The bashan is still fighting me every step of the assembly ,,got the carb sorted out. An the tailight working. ,,but the turn signals don't work. ,,,,,Strange tho ,because when you start the bike up the four - ways blink for about a minute then go off ,it does this with the security system hooked up or bypassed the way one poster on here showed. I'll dig in to the wiring tomorrow .

[fishman10]

Got it all assembled, loctite ,,dieletic grease on connections,, pretty impressed with the gearing,,,, an probably the best suspension on any China bike I've ever ridden!

[MOTOXtreme]

If it has the same suspension as the Brozz I would agree it is great. I changed the folk oil to quality oil and it road much better than I ever expected.

[pcspecialist]

Brozz has better rear swingarm (chain adjusters). I wish it wasn't for a drum brake because if it were for disc I would make an attempt to replace my Hawk's with it.

[fishman10]

Motoxtreme , do recall how much fork oil you used in each leg of your bashan?

[MOTOXtreme]

Originally Posted by pcspecialist

Brozz has better rear swingarm (chain adjusters). I wish it wasn't for a drum brake because if it were for disc I would make an attempt to replace my Hawk's with it.

Do not let the rear drum deter you. Mine had great stopping power. Plus, its still widely used among mainstream bikes.

Originally Posted by fishman10

Motoxtreme , do recall how much fork oil you used in each leg of your bashan?

I'm pretty sure I used appx 225ml in each fork. Ive since sold the bike, but not because of any issues.