need help with wiring

kalboking · 11-08-2015, 05:42 PM

Just picked up a basket case wildfire 200cc has one of those Lifan clone motors.

Anyway i'm not getting spark. Ignition switch is missing and toggle switch is there.

There are 2 wiring harnesses coming out from crankcase one has six wires but only one is attached. I'm going to guess that is for the lights or charging

The other plug has 5 wires.
blue/white,
pink ,
yellow,
green/wht,
black/red???

Anyone know which wires to test for resistance/ohm?? and the values it should be??

FastDoc · 11-08-2015, 06:33 PM

IIRC there was a Lifan importer in Seattle who had wiring diagrams on the website. Hooper?

kalboking · 11-08-2015, 07:09 PM

It has wire rectifier yellow,yellow, red, green. i'm guessing yellow is a/c cuurent from stator?? red must be to battery?? What is green?? it looks like it might be grounded through housing.

humanbeing · 11-08-2015, 07:10 PM

IGN ht coil: http://www.sanxin.com.cn/info5/index.asp?id=20
---
CDI
http://www.sanxin.com.cn/info5/index.asp?id=16
---
Typical wiring:
http://www.sanxin.com.cn/Exhibit/exhview.asp?pid=5

IGN source coil (EXT) sometimes F*** in older chinese bike (Honda shop manual always tells at least 100 volt / From my rusting memory it's somthing ~4xx ohm) in that case plug a DC-CDI bypass it is the quick solution.

The chance of trigger/ pickup FAil is very low BUT air gap btw rotor maybe f***ed https://translate.google.com/transla...354&edit-text= .

humanbeing · 11-08-2015, 11:44 PM

Color code:
http://fanyi.baidu.com/transpage?que...to=en&render=1
---
For ref ONLY
blue/white (pickup / trigger [+] )
pink (to rec)
yellow (to rec)
green/wht (pickup / Trigger [-] can be joined to GND in theory )
black/red (EXT | AC source for CDI)

The other set is for the gear display.

11-08-2015, 05:42 PM	#1
kalboking Join Date: Sep 2015 Posts: 7	need help with wiring Just picked up a basket case wildfire 200cc has one of those Lifan clone motors. Anyway i'm not getting spark. Ignition switch is missing and toggle switch is there. There are 2 wiring harnesses coming out from crankcase one has six wires but only one is attached. I'm going to guess that is for the lights or charging The other plug has 5 wires. blue/white, pink , yellow, green/wht, black/red??? Anyone know which wires to test for resistance/ohm?? and the values it should be??
	0

11-08-2015, 06:33 PM	#2
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	IIRC there was a Lifan importer in Seattle who had wiring diagrams on the website. Hooper? __________________ Happy to serve.
	0

11-08-2015, 07:10 PM	#4
humanbeing Join Date: Mar 2008 Posts: 2,436	IGN ht coil: http://www.sanxin.com.cn/info5/index.asp?id=20 --- CDI http://www.sanxin.com.cn/info5/index.asp?id=16 --- Typical wiring: http://www.sanxin.com.cn/Exhibit/exhview.asp?pid=5 IGN source coil (EXT) sometimes F* in older chinese bike (Honda shop manual always tells at least 100 volt / From my rusting memory it's somthing ~4xx ohm) in that case plug a DC-CDI bypass it is the quick solution. The chance of trigger/ pickup FAil is very low BUT air gap btw rotor maybe fed https://translate.google.com/transla...354&edit-text= . __________________ Last edited by humanbeing; 11-08-2015 at 11:40 PM.*
	0

11-08-2015, 11:44 PM	#5
humanbeing Join Date: Mar 2008 Posts: 2,436	Color code: http://fanyi.baidu.com/transpage?que...to=en&render=1 --- For ref ONLY blue/white (pickup / trigger [+] ) pink (to rec) yellow (to rec) green/wht (pickup / Trigger [-] can be joined to GND in theory ) black/red (EXT \| AC source for CDI) The other set is for the gear display. __________________ Last edited by humanbeing; 11-09-2015 at 12:22 AM.
	0

11-08-2015, 07:09 PM	#3
kalboking Join Date: Sep 2015 Posts: 7	It has wire rectifier yellow,yellow, red, green. i'm guessing yellow is a/c cuurent from stator?? red must be to battery?? What is green?? it looks like it might be grounded through housing.
	0