06-09-2022, 05:30 PM
|
#1 |
|
Join Date: Jun 2022
Posts: 3
|
Vitacci pentora 250 sprockets
Not sure what fits? Bolt pattern measures 146 mm from bolt holes center, Yamaha raptor is 145mm, anyone have any sprocket experience
|
|
|
06-11-2022, 05:13 PM
|
#2 |
|
Join Date: Feb 2009
Location: Michigan
Posts: 1,031
|
Post a picture. Might be able to match it to a vehicle that one of the members has.
Edit: looking through the JT sprockets catalog shows the Yamaha ATVS (Raptor, Banshee, ect) all have sprockets with 145mm patterns. http://www.jtsprockets.com/catalogue...search-results You might want to double check your measurements otherwise you might find something looking through sprockets for the other Japanese manufacturers.
__________________
2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D Last edited by david3921; 06-11-2022 at 10:48 PM. |
|
|
|
06-12-2022, 12:47 AM
|
#3 |
|
Join Date: Apr 2010
Location: Texas
Posts: 50
|
Yes, don't sweat it. Rear sprocket is Yamaha Raptor 250, YFZ 450. Front sprocket is JTF 328.
If you need info on these, I may be able to help in some aspects since its mostly based on the YAMAHA RAPTOR 250. I'm racing mine and still researching what works. There is some good info on here about it as well. Engine is (mostly) CRF230F. The key word here is MOSTLY. I hope that helps. TORKER |
|
|
|
06-12-2022, 07:03 PM
|
#4 |
|
Join Date: Jun 2022
Posts: 3
|
Thank you all for your input, just grabbed a Yamaha sprocket, works great, went down to a 38t get a little more speed for the boy
|
|
|
|
|
|
 |
|
|
Linear Mode
