Uncrating a new RX3

sqwert · 03-31-2019, 05:44 PM

For some reason I don't recall wood under the box--mine came with a steel frame instead. If memory serves, steel straps had to be cut to lift off the cardboard box, then the steel frame had to be unbolted. I don't recall mine being so thoroughly assembled, either, so maybe the system shown here is the newer, easier to unpack version. Really, not much to it either way. Just be sure to tighten and Loctite everything and double check all the fluids before starting it up. I went ahead and changed the oil to a dino motorcycle type for break in--you never know what comes in anything these days.

03-31-2019, 05:44 PM	#1
sqwert Join Date: Jun 2017 Posts: 382	For some reason I don't recall wood under the box--mine came with a steel frame instead. If memory serves, steel straps had to be cut to lift off the cardboard box, then the steel frame had to be unbolted. I don't recall mine being so thoroughly assembled, either, so maybe the system shown here is the newer, easier to unpack version. Really, not much to it either way. Just be sure to tighten and Loctite everything and double check all the fluids before starting it up. I went ahead and changed the oil to a dino motorcycle type for break in--you never know what comes in anything these days.
	0