Motorcycle scissors jack with adjustable cuffs

[JerryHawk250]

I just picked up one myself. This is 1200lb rated. Heavy little sucker at 30lbs. https://www.amazon.com/dp/B0CPS4MVX4...t_details&th=1

[Zapkin]

Originally Posted by JerryHawk250

I just picked up one myself. This is 1200lb rated. Heavy little sucker at 30lbs. https://www.amazon.com/dp/B0CPS4MVX4...t_details&th=1

i got one like yours Jerry, but blue (hehe). I find it very unstable for my bike. For one, I have to add wood to even get the rear off the ground and then I dont trust it for a second. I wish I'd have gotten one like he did, one I could lift using the frame. eh well, live and learn. I could put this one up for sale and get one like his, but I will probably just live with it.

[JerryHawk250]

Originally Posted by Zapkin

i got one like yours Jerry, but blue (hehe). I find it very unstable for my bike. For one, I have to add wood to even get the rear off the ground and then I dont trust it for a second. I wish I'd have gotten one like he did, one I could lift using the frame. eh well, live and learn. I could put this one up for sale and get one like his, but I will probably just live with it.

I got this for my Lycan and Vulcan S. They are much lower than the Hawk and KPX. Works perfect on the Lycan and Vulcan.

[Thumper]

Originally Posted by JerryHawk250

I got this for my Lycan and Vulcan S. They are much lower than the Hawk and KPX. Works perfect on the Lycan and Vulcan.

And if you can find an exposed frame under there, it will lift the ST as well

This scissors jack can get pretty low:

[JerryHawk250]

Originally Posted by Thumper

And if you can find an exposed frame under there, it will lift the ST as well

This scissors jack can get pretty low:

Attachment 31341

No need for the ST, It has a center stand.

[TominMO]

Originally Posted by JerryHawk250

I just picked up one myself. This is 1200lb rated. Heavy little sucker at 30lbs. https://www.amazon.com/dp/B0CPS4MVX4...t_details&th=1

Mine is similar. Came with a cheap ratchet wrench and socket + the usual long socket and handle thingy.
https://www.amazon.com/dp/B0B8D7B6MM...t_details&th=1

For those of you who haven't thought of it, remember to grease the worm gear.

[JerryHawk250]

Originally Posted by TominMO

Mine is similar. Came with a cheap ratchet wrench and socket + the usual long socket and handle thingy.
https://www.amazon.com/dp/B0B8D7B6MM...t_details&th=1

For those of you who haven't thought of it, remember to grease the worm gear.

That's the same one minus the ratchet. These are made with a heaver gauge steel than the 1100 lb units. Weighs about 3-4 lbs more.

First thing i did was grease it up.