Vitacci Terminator 300cc 4x4 atv

dugndeep · 05-02-2024, 11:09 AM

I had a big black walnut tree blow down probably 1 years ago,I finally decided to cut it up & drag it to a burn pile.It's probably 18" to 24" in diameter and I cut it up into 5 or 6 foot pieces and used the Vitacci 300 to pull it up a steep hill to a burn pile.Had to put it in 4x4 or it couldn't pull it up the steep hill.The Bull 200 would have trouble pulling a piece on level ground let alone up a steep incline.6 foot piece & I could barely stand it up to flip it into the burn pile.If not for the 4x4 atv I would have had to cut it up into 3 foot pieces just to pull it with the bull up the hill.Probably not going to work the Vitacci that hard again,if I could have got the tractor down by the creek I would have just used that but couldn't get it down into the creek & get back out.

05-02-2024, 11:09 AM	#40
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 429	I had a big black walnut tree blow down probably 1 years ago,I finally decided to cut it up & drag it to a burn pile.It's probably 18" to 24" in diameter and I cut it up into 5 or 6 foot pieces and used the Vitacci 300 to pull it up a steep hill to a burn pile.Had to put it in 4x4 or it couldn't pull it up the steep hill.The Bull 200 would have trouble pulling a piece on level ground let alone up a steep incline.6 foot piece & I could barely stand it up to flip it into the burn pile.If not for the 4x4 atv I would have had to cut it up into 3 foot pieces just to pull it with the bull up the hill.Probably not going to work the Vitacci that hard again,if I could have got the tractor down by the creek I would have just used that but couldn't get it down into the creek & get back out.
	0