03-05-2020, 01:56 PM | #1 |
Join Date: Mar 2020
Posts: 1
|
Hawk 250 Oil leaks
To start off, i bought a used 2016 hawk 250 around 2 or 3 month ago and have been riding it since, and the small oil leaks it had got to the point where i couldn’t ignore them any longer. I have now pulled the engine and started taking off covers and realized the gasket set that came with the bike is missing some notable pieces, i need all the main case gaskets and also the seals that go around the kick starter rod and the seal that goes around the shifter. i’ve done some looking around and haven’t found anything conclusive. if anyone could point me i. the right direction it would be a big help!
|
|
03-05-2020, 06:31 PM | #2 |
Join Date: May 2016
Posts: 237
|
Hondabond. A very thin coat is all thats needed between the cases. anymore and it will get squoze out and might plug up the oiling. i dont have a source on the seals but most bikes have no case gasket. dont use the crap at the autoparts store go to a motorcycle store. hondabond yamabond is all the same stuff.
__________________
500cc Hawk Project http://www.chinariders.net/showthrea...372#post281372 |
|
03-05-2020, 07:38 PM | #3 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
Might be able to supply another gasket set etc
Sent 1 to a bloke in NC Email me if needed |
|
|
|
|
|