04-23-2016, 11:18 AM
|
#1 |
|
Join Date: Apr 2016
Posts: 28
|
New Hawk...! down 1 To Go.
Just received two new Hawks Yesterday from apscusa.com. One is assembled and all tuned up. The other is in the crating ready for assembly. The only trouble I had was that the front wheel hub spacer was missing. Luckily I have a CNC Mill so I just made one. Now to get them Titled, Registered, and Insured.
__________________________________________________ _________________ 2015 haosen hawk 250 X2 2003 Honda VTX 1800R Custom |
|
|
04-23-2016, 11:34 AM
|
#2 |
Join Date: Mar 2016
Location: Tuscaloosa Al.
Posts: 433
|
very nice!...it might just be me, but are your forks all the the way down flush to the triple tree top? front end looks a tad low.....could jut be me.
__________________
Wingless Hawk, 2016 orange RX3, 97 wide glide,2003 KLR |
|
|
|
04-23-2016, 12:07 PM
|
#3 |
|
Join Date: Dec 2015
Location: CO
Posts: 1,525
|
It's not just you Ron B, those front forks need to be lowered a bit by the looks of the front wheel/fender and headlight
__________________
"Think as you like... but this self proclaimed Professor is always right" - Buckshot  "You never know what someone is hiding beneath their smile..." - NinjaTom - R.I.P. |
|
|
|
04-23-2016, 01:33 PM
|
#5 |
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
|
Congratulations ! ! !
__________________
************************************************** *** " Time you enjoy wasting, is not wasted." - John Lennon  “I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.” ― Thomas Jefferson "If you don't know where you're going any road will take you there" ....George Harrison song |
|
|
|
04-24-2016, 03:36 AM
|
#6 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Congratulations on your pair of Hawk motorcycles.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience."  Mark Twain2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
04-25-2016, 11:01 AM
|
#7 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Congrats! I hope the second assembly goes well.
I'd love to see pics of your mill.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
04-29-2016, 10:52 AM
|
#9 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
That's very cool! Is it a five axis mill?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
04-29-2016, 12:46 PM
|
#10 |
|
Join Date: Apr 2016
Posts: 28
|
Mill Specs
weldandgrind,
Its a 3 axis Haas OM-2A. It has a 30000 rpm spindle, 12x10x12 travel and tops out at 400ipm feedrate. I picked it up at an auction a few years ago for 10K but it had a bad spindle. I rebuilt it myself to save some money. |
|
|
|
05-02-2016, 11:06 AM
|
#11 |
|
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I'll bet there isn't much you couldn't build with it. In fact, you could probably replicate the entire mill.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
|
|
 |
|
|
Linear Mode
