(((Full Bike Over haul)))

pchestaro · 11-06-2011, 02:04 PM

This Is a Project on the making. and i whant to document everything here
This was my Dads Chinese bike in the dominican republic. i will like to know what brand is it., He loved this bike and i like to Put some time and money in to It. hi was murder in 2009. and this bike means a lot To me.
i already have a bunch of stuff coming my way from al over. R6 shock,Handle bars,exhaust, jets, sprockets. lights, Seat, plastics, ETC.
hope by documenting everything here will help others.
as all of my research i did it on this nice forum you guys have put together
Thanks to all!!!

(((Let The journey begin))))
RIP.Salvador Chestaro

Weldangrind · 11-06-2011, 10:23 PM

Welcome!

I'm very sorry to hear about your father. You honour his memory by restoring his bike; I hope it gives you many happy miles.

I don't know what kind of bike you have, but I know that the engine is very similar to a Honda CG125. Yours could be a 150 or a 200. The should be a number stamped on the side of the engine, near the gear shift. If you tell us that number, we might be able to tell you more. Is there any information on the steering head decal?

pchestaro · 11-06-2011, 11:42 PM

Thanks for the info Weldangrind. well appreciated!
i started cleaning the bike last Fall, being that i work summers in USA. i order all the parts being that i am here in the states, i will be heading back to The Island first week of december. and will look for those numbers. here is a picture of the bike after a little Cleaning up. and afew parts that i was able to get over there, Any suggestions are welcome!..
:arrow: Looking for Swingarm and exhaust header compabilitys..

Here is list of the things order so far

-Renthal Fat bars CR hi
-FMF Powercore 4 Exhaust Pipe.
-Front Drive Sprocket Honda CB175 15t
-HONDA CB175 REAR SPROCKET 47T
-MOOSE RACING CHAIN 428 RXP PRO MX 130 LINKS
-HONDA XL125 XL125S PERFORMANCE JET KIT 1978 - 1985
-BLACK GRIPPER SEAT COVER HONDA XR250 XR200 XR
-Pro Taper ProTaper Universal Mount Kit Fat Bar Clamps
-01 YAMAHA YZF R6 REAR SHOCK
-Monoshock Linkage From Hooper Imports
-Acerbis Fork Guards
-Renthal Hand Guards
-Motorcycle Clutch Brake Levers Set.
-UFO Universal Supermoto Front Fender
-ProGrip PG790 Triple Density Grips
-Edge 2 Tail
- ZS 200 GY Mudguard (Rear) (China Parts.com)
- Grip Throttle - GY
-Side Inspection Covers (Chinaparts.com)

This is how the bike sit's rigth now in DR whaiting for me to get there
i will post all the Pictures of the progress when i get there..

pchestaro · 11-07-2011, 06:32 PM

Just Got my R6 Shock in the Mail Today

FastDoc · 11-07-2011, 06:37 PM

Welcome to our forum. We appreciate you sharing your project with us.

I am also sorry to hear about your dad. My father was also murdered in 1973 when I was 8 and I still value those few things of his I have.

The exact brand of your bike is not too important. For the most part a Honda clone Chinabike is the same as any other.

Thanks for the pictures.

Bill

pchestaro · 11-07-2011, 09:01 PM

Thanks Fastdoc

pchestaro · 11-08-2011, 08:34 PM

Hey Guys Got home from work And found my new Linkage From Hooper Imports, in the mail

i am One Happy Guy Today,, is a shame i cant work on the bike right away :( :( :(

Sorry For the blurry image!!

SpudRider · 11-09-2011, 12:41 AM

Welcome to these forums. I'm sorry to hear about your father; please accept my condolences. :(

Thank you for sharing your project with us. You came to the right place for help.

Spud

pchestaro · 11-21-2011, 06:50 PM

Just a little update on the stuff i got in the Mail..
Can't wait, get this project going

THE BOX OF "GOODYS"

FastDoc · 11-21-2011, 06:51 PM

That's a nice chain. O ring?

pchestaro · 11-21-2011, 06:59 PM

No I Dont think so Fast Dog. :( But i am pretty sure it bits the stocker by far..

SpudRider · 11-21-2011, 08:30 PM

Wow! That's a very nice box of goodies!

Please continue to keep us updated.

Spud

Weldangrind · 11-21-2011, 10:47 PM

You're gonna love your bike when it's finished.

pchestaro · 11-25-2011, 12:22 PM

Does Any one know where can i get the Qs xp200/xf200 Speedo?? is the only speedo that i will like to put on the bike..

Thanks in advance to all.. Happy ThanksGiving to all..

SpudRider · 11-25-2011, 12:27 PM

Quote:

Originally Posted by pchestaro

Does Any one know where can i get the Qs xp200/xf200 Speedo?? is the only speedo that i will like to put on the bike..

Thanks in advance to all.. Happy ThanksGiving to all..

I suggest you contact QLink Motors.

http://www.qlinkmotor.com/contact/contact.php

Spud

11-06-2011, 02:04 PM	#1
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	(((Full Bike Over haul))) This Is a Project on the making. and i whant to document everything here This was my Dads Chinese bike in the dominican republic. i will like to know what brand is it., He loved this bike and i like to Put some time and money in to It. hi was murder in 2009. and this bike means a lot To me. i already have a bunch of stuff coming my way from al over. R6 shock,Handle bars,exhaust, jets, sprockets. lights, Seat, plastics, ETC. hope by documenting everything here will help others. as all of my research i did it on this nice forum you guys have put together Thanks to all!!! (((Let The journey begin)))) RIP.Salvador Chestaro
	0

11-06-2011, 10:23 PM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Welcome! I'm very sorry to hear about your father. You honour his memory by restoring his bike; I hope it gives you many happy miles. I don't know what kind of bike you have, but I know that the engine is very similar to a Honda CG125. Yours could be a 150 or a 200. The should be a number stamped on the side of the engine, near the gear shift. If you tell us that number, we might be able to tell you more. Is there any information on the steering head decal? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-07-2011, 06:37 PM	#5
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	Welcome to our forum. We appreciate you sharing your project with us. I am also sorry to hear about your dad. My father was also murdered in 1973 when I was 8 and I still value those few things of his I have. The exact brand of your bike is not too important. For the most part a Honda clone Chinabike is the same as any other. Thanks for the pictures. Bill __________________ Happy to serve.
	0

11-09-2011, 12:41 AM	#8
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Welcome to these forums. I'm sorry to hear about your father; please accept my condolences. :( Thank you for sharing your project with us. You came to the right place for help. Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-21-2011, 06:51 PM	#10
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	That's a nice chain. O ring? __________________ Happy to serve.
	0

11-06-2011, 11:42 PM	#3
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	Thanks for the info Weldangrind. well appreciated! i started cleaning the bike last Fall, being that i work summers in USA. i order all the parts being that i am here in the states, i will be heading back to The Island first week of december. and will look for those numbers. here is a picture of the bike after a little Cleaning up. and afew parts that i was able to get over there, Any suggestions are welcome!.. :arrow: Looking for Swingarm and exhaust header compabilitys.. Here is list of the things order so far -Renthal Fat bars CR hi -FMF Powercore 4 Exhaust Pipe. -Front Drive Sprocket Honda CB175 15t -HONDA CB175 REAR SPROCKET 47T -MOOSE RACING CHAIN 428 RXP PRO MX 130 LINKS -HONDA XL125 XL125S PERFORMANCE JET KIT 1978 - 1985 -BLACK GRIPPER SEAT COVER HONDA XR250 XR200 XR -Pro Taper ProTaper Universal Mount Kit Fat Bar Clamps -01 YAMAHA YZF R6 REAR SHOCK -Monoshock Linkage From Hooper Imports -Acerbis Fork Guards -Renthal Hand Guards -Motorcycle Clutch Brake Levers Set. -UFO Universal Supermoto Front Fender -ProGrip PG790 Triple Density Grips -Edge 2 Tail - ZS 200 GY Mudguard (Rear) (China Parts.com) - Grip Throttle - GY -Side Inspection Covers (Chinaparts.com) This is how the bike sit's rigth now in DR whaiting for me to get there i will post all the Pictures of the progress when i get there..
	0

11-07-2011, 06:32 PM	#4
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	Just Got my R6 Shock in the Mail Today
	0

11-07-2011, 09:01 PM	#6
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	Thanks Fastdoc
	0

11-08-2011, 08:34 PM	#7
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	Hey Guys Got home from work And found my new Linkage From Hooper Imports, in the mail i am One Happy Guy Today,, is a shame i cant work on the bike right away :( :( :( Sorry For the blurry image!!
	0

11-21-2011, 06:50 PM	#9
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	Just a little update on the stuff i got in the Mail.. Can't wait, get this project going THE BOX OF "GOODYS"
	0

11-21-2011, 06:59 PM	#11
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	No I Dont think so Fast Dog. :( But i am pretty sure it bits the stocker by far..
	0

11-21-2011, 08:30 PM	#12
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Wow! That's a very nice box of goodies! Please continue to keep us updated. Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-21-2011, 10:47 PM	#13
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	You're gonna love your bike when it's finished. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-25-2011, 12:22 PM	#14
pchestaro Join Date: Apr 2011 Location: Dominican Republic Posts: 53	Does Any one know where can i get the Qs xp200/xf200 Speedo?? is the only speedo that i will like to put on the bike.. Thanks in advance to all.. Happy ThanksGiving to all..
	0