02-22-2017, 04:35 PM | #6 |
Join Date: Feb 2009
Location: Michigan
Posts: 1,030
|
Nice job on the fit up. If you don't like that gap between the seat and tank, I would suggest a heat gun to soften up the plastic to form it down. You'll have to pull the staples out from the seat to allow it to move, though. Also, you'll have to cut a triangle out of both sides of the front lower part of the seat pan. This will allow it to form down to the tank without bulging out...or in.
__________________
2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D |
|
|
|
|
|