Wheel Bearings

KenTaoyan · 06-18-2021, 11:31 AM

I picked up new bearings from All Balls Racing and I started with my front wheel. I tapped out the old bearings (with a learning curve) but I noticed that the spacer had lots of scaring on one side. Is that normal?

Also, I sourced the wrong seals (dust covers?) on both front and back. Anybody have Part numbers for those? How about a cut sheet for wheel assembly for old guys that cant remember how it goes back together?

any help is appreciative.

Thanks

Its_not_a_honda · 06-18-2021, 10:15 PM

Not sure what bike you are working on. But I crossed the seals (on my apollo 250) over to a Suzuk.

KenTaoyan · 06-19-2021, 02:13 AM

Sorry, 2020 Hawk 250

Its_not_a_honda · 06-19-2021, 03:20 AM

You may want to look up Megadan on here. He has links to hawk mods and recommendations. He is our guru of motorcycles. Maybe he will chime in here in a bit.

Megadan · 06-19-2021, 10:12 AM

The spacer end is just roughly cut and was never cleaned up/smoothed out. You can do so if you desire with a bit of sanding or a file, just don't go removing a ton of metal. Even roughly cut like that it won't affect anything negatively. That spacer is simply there to brace between the inner races when you tighten the axle nut.

As far as seals go, the seal dimensions are listed in the resource guide.

Quote:

Originally Posted by Megadan

Wheel Seal dimensions.

Rear
25x47x10 1 each.

28x42x7 1 each.

Front.
23x37x7 1 each.

KenTaoyan · 06-20-2021, 01:49 PM

thanks Dan, sorry I missed that. I thought that I thoroughly did the search criteria on this but I missed it.

Again, thanks

Megadan · 06-20-2021, 06:05 PM

Quote:

Originally Posted by KenTaoyan

thanks Dan, sorry I missed that. I thought that I thoroughly did the search criteria on this but I missed it.

Again, thanks

No worries. There is a lot of stuff to look through lol

06-18-2021, 10:15 PM	#2
Its_not_a_honda Join Date: Jan 2018 Posts: 410	Not sure what bike you are working on. But I crossed the seals (on my apollo 250) over to a Suzuk. __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more.
	0

06-19-2021, 02:13 AM	#3
KenTaoyan Join Date: May 2020 Location: Des Moines WA Posts: 81	Sorry, 2020 Hawk 250 __________________ ~ toys in the cave (in the order of addition) 81 Honda XL185s {work in progress} 2015 TaoTao 125cc Quad {junk} 2018 QIYI Coolster 150cc Quad 2019 QIYI Coolster 125cc Quad 2020 Hawk 250cc (Brand New work in progress) 2021 Roughhouse 50 (neat little scooter for the wife) I may not be fast but I am "Half-Fast"
	0

06-19-2021, 03:20 AM	#4
Its_not_a_honda Join Date: Jan 2018 Posts: 410	You may want to look up Megadan on here. He has links to hawk mods and recommendations. He is our guru of motorcycles. Maybe he will chime in here in a bit. __________________ 2020 Kawasaki KLX300R, 2018 Yamaha TW200 If you want more of something, tax it less. If you want less of something, tax it more.
	0

06-20-2021, 01:49 PM	#6
KenTaoyan Join Date: May 2020 Location: Des Moines WA Posts: 81	thanks Dan, sorry I missed that. I thought that I thoroughly did the search criteria on this but I missed it. Again, thanks __________________ ~ toys in the cave (in the order of addition) 81 Honda XL185s {work in progress} 2015 TaoTao 125cc Quad {junk} 2018 QIYI Coolster 150cc Quad 2019 QIYI Coolster 125cc Quad 2020 Hawk 250cc (Brand New work in progress) 2021 Roughhouse 50 (neat little scooter for the wife) I may not be fast but I am "Half-Fast"
	0