Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-30-2016, 11:33 PM   #1
xposur   xposur is offline
 
Join Date: Jun 2015
Location: Des Plaines, IL
Posts: 85
No spark on hawk :(

In the middle of finishing up tuning the carb the bike died after running a few minutes on idle. Wouldnt start. It cranks and turns over, has compression, spark plug is wet with fuel. I initially thought it might have been the coil, checked the resistance, and its good, then I thought maybe its the spark plug wire..swapped out the coil and wire into another bike and it was getting spark. So the coil and plug is good, fuel is good. but no spark

I really dont wanna cut into the wire harness and follow the 2 wires from coil and see if there is a connectivity issue or maybe the kill switch malfunctioned.

Any suggestions?


 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.