Hawk Gear indicator problem

Bill1 · 11-13-2017, 02:50 PM

I finally installed my digital cluster for the Hawk and I am missing the 5th gear indicator. I jumpered to the new harness and the new cluster and harness work fine (When the bike is in 4th and I jumper from the 4th gear wire on the bike harness to 5th in cluster harness, the new cluster says 5th).
But when I try to jumper the 5th gear wire from the bike harness to any of the pins on the cluster harness, I get nothing.

All of the other gears and neutral work fine.

How hard is it to get to the gear indicator sending unit?

11-13-2017, 02:50 PM	#1
Bill1 Join Date: Sep 2016 Location: FL Posts: 95	Hawk Gear indicator problem I finally installed my digital cluster for the Hawk and I am missing the 5th gear indicator. I jumpered to the new harness and the new cluster and harness work fine (When the bike is in 4th and I jumper from the 4th gear wire on the bike harness to 5th in cluster harness, the new cluster says 5th). But when I try to jumper the 5th gear wire from the bike harness to any of the pins on the cluster harness, I get nothing. All of the other gears and neutral work fine. How hard is it to get to the gear indicator sending unit? __________________ 2016 RPS Hawk 250, exhaust, Uni Filter, Mikuni VM-26 clone w/ 120 main & 30 pilot, MSR shifter, 17/45 sprockets, JT chain, digital cluster...
	0