Grom Forks installed

Whisky · 11-27-2019, 05:11 AM

wlfpck Thanks for that write up, I was aware that it did consist of some hardware items but did not have a list to go by. Next yr when I get around to improving the forks I might try this along with new fork oil and the race Tech springs. Thanks again.

wlfpck · 11-27-2019, 08:40 AM

Quote:

Originally Posted by Whisky

wlfpck Thanks for that write up, I was aware that it did consist of some hardware items but did not have a list to go by. Next yr when I get around to improving the forks I might try this along with new fork oil and the race Tech springs. Thanks again.

No problem!

This is the part list that is for the 1st gen Grom to do that ND4sph mod.

2x - 59363-F - 1in Spacer (5/16ID - .469in OD - 1in Long)
4x - 3815-F - Neoprene washer (7/16ID - 1in OD)
2x - 43110-N - M8x50 1.25 pitch bolt
2x - 43893-E - Small M8 Washer

The part numbers are from Hillman.

11-27-2019, 05:11 AM	#1
Whisky Join Date: Aug 2018 Posts: 286	wlfpck Thanks for that write up, I was aware that it did consist of some hardware items but did not have a list to go by. Next yr when I get around to improving the forks I might try this along with new fork oil and the race Tech springs. Thanks again. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0