11-16-2022, 09:59 AM
|
#6 |
|
Join Date: Feb 2016
Location: Portsmouth, Virginia, USA
Posts: 632
|
Although it would be nice if the RX4 tool kit was all you need for basic maintenance that's not the case. You will need, at a minimum, a 3mm allen wrench just to get the plastic panels off. I'd recommend a "T" handle metric allen set because you will need them so often. Then a basic metric open/box end wrench set and you are good to go.
Peter Y. |
|
|
|
|
|
|
Threaded Mode