200cc engine identification and info

l-ovie · 08-13-2014, 05:33 AM

Hi all
I have just recently bought a second hand 200cc Yamoto, shaft drive atv and I cannot find any info on it. From what I can gather it seems to be a 200cc loncin (or copy of) OHC??...see attached pic....what do you think?

I want to ensure everything is ok and up to spec, for example valve clearance? I have come across what seem to be conflicting specs (or me with wrong engine identifcation

), .002" for both or .003" inlet and .004" exhaust.

Does anyone know where I can get service manual or similar??
Your help is much appreciated!!!

humanbeing · 08-13-2014, 06:21 AM

What's stamped ( ??1??FM? /http://www.motorfans.com.cn/bbs/t_17705986.htm) on the engine?
Commonest "CB" (OHC) 200 had a 63.5 bore. Manual : http://chinariders.net/showthread.php?t=13912 | Honda spec about these 63.5 x 62.2 = IN/EX 0.1mm

l-ovie · 08-13-2014, 07:06 AM

it is stamped 163FML with engine number directly below

Thanks for the quick reply!!!

wilphins1 · 02-16-2015, 12:13 PM

I have the 2005 komodo shaft drive and im needing the gear box for this same motor.Any idea where i can find parts for the drive?thanks

Ben28 · 04-23-2015, 08:13 AM

Hi, Are you still looking for the manual? I've just rebuild an old 200cc ATV same as your stamp, I think it might refer to Fuxin Manufacturing Limited, they make engines. The Clymer manual for 1980 Honda's 125-200 is the engine you want to take your spec from. I did and my engine is humming. I'm only passing on what I found to be good advice. There's going to be some differences but if you're any way handy you'll figure that out. Valve clearances etc are all there. I have a copy and can email you it if you want.

08-13-2014, 06:21 AM	#2
humanbeing Join Date: Mar 2008 Posts: 2,436	What's stamped ( ??1??FM? /http://www.motorfans.com.cn/bbs/t_17705986.htm) on the engine? Commonest "CB" (OHC) 200 had a 63.5 bore. Manual : http://chinariders.net/showthread.php?t=13912 \| Honda spec about these 63.5 x 62.2 = IN/EX 0.1mm __________________ Last edited by humanbeing; 08-13-2014 at 06:56 AM.
	0

02-16-2015, 12:13 PM	#4
wilphins1 Join Date: Feb 2015 Posts: 8	2005 komodo I have the 2005 komodo shaft drive and im needing the gear box for this same motor.Any idea where i can find parts for the drive?thanks
	0

08-13-2014, 07:06 AM	#3
l-ovie Join Date: Aug 2014 Posts: 2	it is stamped 163FML with engine number directly below Thanks for the quick reply!!!
	0

04-23-2015, 08:13 AM	#5
Ben28 Join Date: Apr 2015 Posts: 2	Hi, Are you still looking for the manual? I've just rebuild an old 200cc ATV same as your stamp, I think it might refer to Fuxin Manufacturing Limited, they make engines. The Clymer manual for 1980 Honda's 125-200 is the engine you want to take your spec from. I did and my engine is humming. I'm only passing on what I found to be good advice. There's going to be some differences but if you're any way handy you'll figure that out. Valve clearances etc are all there. I have a copy and can email you it if you want.
	0