ODB adaptor

toniintc · 02-12-2020, 04:35 PM

Hello,

I have a Helvenco Aero 1000 engine. It's a paramotor engine, for reference here:

https://www.blackhawkstore.com/produ...-package-deal/

The engine is based on the Swissauto 250 with fuel injection added.

I bought a DN-3000 OBD scanner for it as I know it'll work with it, but I need an adaptor to go from this connector:

https://www.amazon.com/clouddrive/sh...TsK6mDSssyjWnH

to this connector:

https://www.amazon.com/clouddrive/sh...B3jIe8jb7H0XMP

Does anyone know of an adaptor like this or at a minimum know where I could buy the oblong end? I've search and searched the internet to no avail.

Thank you,
Toni

bogieboy · 02-12-2020, 04:43 PM

by the look of the ends, you are looking for a Fiat Lancia to OBD connector... 3 pin with a locator to the obd 16 pin.

https://www.ebay.com/itm/3-Pin-to-16...IAAOxyJ8ZRiNux

toniintc · 02-13-2020, 09:17 AM

Wow, thank you. I borrowed a scanner and adaptor a while back that didn't have the two extra leads. I'm not sure where I'd connect those. Is it possible they are not necessary?

Toni

[QUOTE=bogieboy;328392]by the look of the ends, you are looking for a Fiat Lancia to OBD connector... 3 pin with a locator to the obd 16 pin.

Bruces · 02-13-2020, 09:39 AM

Just a guess but those other two leads are probably for an outside power supply ,they may not be necessary in your application

bogieboy · 02-13-2020, 10:29 AM

That would be my guess as well, external power source if the ecu doesnt power the scanner thru the plug.

toniintc · 02-14-2020, 08:24 AM

OK, thank you both, I really appreciate your responses.

toniintc · 02-27-2020, 06:42 PM

I'm back. I received the adaptor today and realized that when bogieboy provided the EBay link above I got so excited that the connector matched that I checked out thinking about the gender. My description was confusing too. One end (the 16 pin end) of the adaptor in bogieboy's product photo is fine, the 3 pin end needs to be female pinned. In other words, now that I have the adaptor above, I just need to find this end:

https://www.amazon.com/clouddrive/sh...B3jIe8jb7H0XMP

and I can cut the 3 pin end off that came with the adaptor and put it on.

Doesn't seem like it should be that hard to find, but it's challenging. The 3 pin end has "PA66 B" on it, but PA66 is on a lot of ends so it's not helpful.

Anyone seen a plug like that? Alibaba, Amazon, Ebay, nothing.

rider777 · 06-15-2020, 05:12 PM

Hi @toniintc, did you manage to get the adapter? I'm also interested in testing this.
Are you pretending to try to remap the ECU or only for diagnostic purposes?

02-12-2020, 04:35 PM	#1
toniintc Join Date: Jan 2020 Posts: 4	ODB adaptor Hello, I have a Helvenco Aero 1000 engine. It's a paramotor engine, for reference here: https://www.blackhawkstore.com/produ...-package-deal/ The engine is based on the Swissauto 250 with fuel injection added. I bought a DN-3000 OBD scanner for it as I know it'll work with it, but I need an adaptor to go from this connector: https://www.amazon.com/clouddrive/sh...TsK6mDSssyjWnH to this connector: https://www.amazon.com/clouddrive/sh...B3jIe8jb7H0XMP Does anyone know of an adaptor like this or at a minimum know where I could buy the oblong end? I've search and searched the internet to no avail. Thank you, Toni
	0

02-12-2020, 04:43 PM	#2
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,042	by the look of the ends, you are looking for a Fiat Lancia to OBD connector... 3 pin with a locator to the obd 16 pin. https://www.ebay.com/itm/3-Pin-to-16...IAAOxyJ8ZRiNux Last edited by bogieboy; 02-12-2020 at 04:44 PM. Reason: added photo
	3

02-13-2020, 09:17 AM	#3
toniintc Join Date: Jan 2020 Posts: 4	Wow, thank you. I borrowed a scanner and adaptor a while back that didn't have the two extra leads. I'm not sure where I'd connect those. Is it possible they are not necessary? Toni [QUOTE=bogieboy;328392]by the look of the ends, you are looking for a Fiat Lancia to OBD connector... 3 pin with a locator to the obd 16 pin.
	1

02-13-2020, 09:39 AM	#4
Bruces Join Date: May 2018 Posts: 1,572	Just a guess but those other two leads are probably for an outside power supply ,they may not be necessary in your application
	1

02-13-2020, 10:29 AM	#5
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,042	That would be my guess as well, external power source if the ecu doesnt power the scanner thru the plug.
	1

02-14-2020, 08:24 AM	#6
toniintc Join Date: Jan 2020 Posts: 4	OK, thank you both, I really appreciate your responses.
	1

02-27-2020, 06:42 PM	#7
toniintc Join Date: Jan 2020 Posts: 4	I'm back. I received the adaptor today and realized that when bogieboy provided the EBay link above I got so excited that the connector matched that I checked out thinking about the gender. My description was confusing too. One end (the 16 pin end) of the adaptor in bogieboy's product photo is fine, the 3 pin end needs to be female pinned. In other words, now that I have the adaptor above, I just need to find this end: https://www.amazon.com/clouddrive/sh...B3jIe8jb7H0XMP and I can cut the 3 pin end off that came with the adaptor and put it on. Doesn't seem like it should be that hard to find, but it's challenging. The 3 pin end has "PA66 B" on it, but PA66 is on a lot of ends so it's not helpful. Anyone seen a plug like that? Alibaba, Amazon, Ebay, nothing.
	0

06-15-2020, 05:12 PM	#8
rider777 Join Date: Jun 2020 Posts: 1	Hi @toniintc, did you manage to get the adapter? I'm also interested in testing this. Are you pretending to try to remap the ECU or only for diagnostic purposes?
	0