Gio Beast Back Brakes Have Tryed To Bleed But Nothing

FLASHLIGHTBOY · 07-23-2009, 01:49 AM

HELLO , I sell the ZSTAR line of quads.. and a lot times the rear hyraudlic brakes need bleeding .. these ones are self bleeding .. and how to bleed them is by .. 1.. take the cover off .
2 .. put a cloth of cover under the brake reserve... to protect the bike from splash
3 .. slowly move the lever a small amount.. you should see little bubbles coming from the bottom of the reserve..
4 .. do this until it bleeds.. you may have to move it a full stroke.. but usually it just bleeds when you move it a little to uncover the port ..
It works for me... good luck
ZSTAR DEALER IN SASKATOON

07-23-2009, 01:49 AM	#3
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	BLEEDING BRAKES HELLO , I sell the ZSTAR line of quads.. and a lot times the rear hyraudlic brakes need bleeding .. these ones are self bleeding .. and how to bleed them is by .. 1.. take the cover off . 2 .. put a cloth of cover under the brake reserve... to protect the bike from splash 3 .. slowly move the lever a small amount.. you should see little bubbles coming from the bottom of the reserve.. 4 .. do this until it bleeds.. you may have to move it a full stroke.. but usually it just bleeds when you move it a little to uncover the port .. It works for me... good luck ZSTAR DEALER IN SASKATOON
	0