Not Again, Dude...

ben2go · 04-17-2019, 10:12 PM

I wish you'd talk to me first. I've worked on a bunch of Vstar 650s and I currently own one. Those stators and pickups are crap usually. Do it once or do again. The best are from https://ricksmotorsportelectrics.com/ and give a bit more output. The OE stuff could barely run the bike.

If you have to go into the carbs, there are two little O-rings in there under the jet standoff tubes. Remove them if they haven't turned into a tar-like substance and don't replace them. They cause all kinds of running issues by restricting the fuel flow.

04-17-2019, 10:12 PM	#12
ben2go Join Date: Jun 2011 Posts: 1,335	I wish you'd talk to me first. I've worked on a bunch of Vstar 650s and I currently own one. Those stators and pickups are crap usually. Do it once or do again. The best are from https://ricksmotorsportelectrics.com/ and give a bit more output. The OE stuff could barely run the bike. If you have to go into the carbs, there are two little O-rings in there under the jet standoff tubes. Remove them if they haven't turned into a tar-like substance and don't replace them. They cause all kinds of running issues by restricting the fuel flow.
	2