03-23-2018, 06:55 AM | #1 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 7,965
|
Sprockets.
Since I converted to a 520 chain, I have a few sprockets sitting around.
Front: Stock Hawk 15 tooth - never used. JTF\ 17 tooth. Rear: Stock Hawk 50 tooth sprocket - never used. JTR 45 tooth - about 400 miles on it JTR 43 tooth - about 800 miles on it. JTR 39 tooth - New. The 43 has a little paint worn off the inside edges of the teeth, but still has a ton of life left. Let's just say that I am rather OCD about chain cleaning and lubrication. I also have a stock hawk chain, never used and not cut. Then there is the EK SROZ O-ring chain (128 links) that was used with the 45 and 43 tooth sprockets. It's rather greasy and needs a clean, but all of the links move firmly and freely. It will need a new master link if interested. The chain, 17 tooth front, and 43 and 45 rears were all used together. Roughly 1200 miles on them. Ideally these should go together. If there is any interest in any of this just let me know. I can provide pictures if desired. Not really looking to recover much in terms of costs, just want to get them out of here. Good way to upgrade a Hawk or Enforcer on the cheap. Make me an offer on any or all.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
03-23-2018, 10:53 AM | #2 |
Join Date: Oct 2017
Location: Houston,Tx
Posts: 257
|
Sent you a pm for the o ring chain
|
|
03-24-2018, 09:09 PM | #3 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 7,965
|
All sold!
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
|
|