The work begins on the Lifan G20-2 - Page 2

DeadRider89 · 05-22-2012, 08:51 PM

well. i found the low beam bulb. so basically i put the entire assembly back together. and am mounting some aftermarket fog lights on the sides of the forks. and am in the process of wiring right now.

Wild_Alaskan · 05-22-2012, 11:16 PM

Quote:

Originally Posted by DeadRider89

Ran into a new problem today. The site glass for the front brake fluid res. Has completely deteriorated.

I put some glue on the front of it to seal it for the mean time. If anybody knows where to get a new one for a decent price please let me know. I looked on ebay. But couldnt seem to find the right one.

heres a master cylinder for ya. this is basically what i run on my street legal ktm.

http://www.ebay.com/itm/YAMAHA-YFZ-4...0c4a53&vxp=mtr

SpudRider · 05-22-2012, 11:56 PM

You might consider installing a Baja Designs headlight, DR. They are relatively inexpensive, good looking, and illuminate the highway very well. Also, replacement parts are inexpensive, and readily available. The BD headlight uses H4 bulbs, which are readily available at Wal-Mart, or any auto parts store.

I installed a Baja Designs headlight on my XR650L, and I like it a lot.

You might enjoy reading the following review of the BD headlight.

http://chinariders.net/modules.php?n...wtopic&t=12625

You can also convert your Lifan headlight to a brighter, more easily obtained, H4 bulb. I did this conversion with my Zong.

http://chinariders.net/modules.php?n...ewtopic&t=8773

Forum member BillR converted his hondoid headlight to an H4 bulb.

http://www.chinariders.net/modules.p...=6685&start=15

Spud

zingshoen · 05-23-2012, 07:29 AM

yes, don t muck around, H4 is the way to go. it s easy to set up, too.

DeadRider89 · 05-23-2012, 12:56 PM

how difficult is the H4 to set up? I'm not to great with wiring but a buddy of mine has been helping me recently.

DeadRider89 · 05-23-2012, 01:12 PM

Also. Added these fog lights last night as a temporary fix.

SpudRider · 05-23-2012, 02:03 PM

Quote:

Originally Posted by DeadRider89

how difficult is the H4 to set up? I'm not to great with wiring but a buddy of mine has been helping me recently.

It's not difficult to convert the stock headlight to an H4 bulb; read the links I provided in my previous thread.

Also, the Baja Designs headlight is good looking, inexpensive, and very easy to install.

Spud

DeadRider89 · 05-24-2012, 02:09 AM

what should my bike be idling at. its at 3grand right now.

gloud · 05-24-2012, 11:00 AM

mine is happy at 2K Lower when warm. (1700)

davidsonsgccc · 05-24-2012, 01:40 PM

i used jb weld on my brake cylinder site glass and it has been holding for a while now. and the h4 bulb makes it much easier to see at night.

DeadRider89 · 05-24-2012, 09:12 PM

has anyone else had a electrical problem. my cluster seems to be surging....

katoranger · 05-27-2012, 01:33 PM

Quote:

Originally Posted by DeadRider89

what should my bike be idling at. its at 3grand right now.

1200-1500rpm. Most likely needing some carb adjustments. Recommend adjusting the c-clip to the second notch from the pointed end.

I found older skidoo headlights bulbs fit. I had the same bike. Ordered from dennis kirk. Recommend going H4 or to the Baja Designs. polisport aftermarket headlight setup.

DeadRider89 · 06-03-2012, 01:20 AM

i have an urgent problem. i have lost my keys. anyone have any suggestions.

SpudRider · 06-03-2012, 01:23 AM

Quote:

Originally Posted by DeadRider89

i have an urgent problem. i have lost my keys. anyone have any suggestions.

You can buy a new ignition switch with keys.

Spud

DeadRider89 · 06-03-2012, 01:25 AM

problem is they dont ship on sundays and i have to get to work monday

05-22-2012, 11:56 PM	#18
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	You might consider installing a Baja Designs headlight, DR. They are relatively inexpensive, good looking, and illuminate the highway very well. Also, replacement parts are inexpensive, and readily available. The BD headlight uses H4 bulbs, which are readily available at Wal-Mart, or any auto parts store. I installed a Baja Designs headlight on my XR650L, and I like it a lot. You might enjoy reading the following review of the BD headlight. http://chinariders.net/modules.php?n...wtopic&t=12625 You can also convert your Lifan headlight to a brighter, more easily obtained, H4 bulb. I did this conversion with my Zong. http://chinariders.net/modules.php?n...ewtopic&t=8773 Forum member BillR converted his hondoid headlight to an H4 bulb. http://www.chinariders.net/modules.p...=6685&start=15 Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

05-23-2012, 07:29 AM	#19
zingshoen Join Date: Jun 2009 Location: Brisbane, Queensland, Australia Posts: 648	yes, don t muck around, H4 is the way to go. it s easy to set up, too. __________________ 1971 Garelli Gulp 50cc with open ports and 16 mm Bing Carbie + 1980 Honda XL 223 ZS + 2007 Zongshen LZX200G + DR400SM
	0

05-24-2012, 01:40 PM	#25
davidsonsgccc Join Date: May 2009 Location: Chickamauga, Ga. Posts: 278	i used jb weld on my brake cylinder site glass and it has been holding for a while now. and the h4 bulb makes it much easier to see at night. __________________ my help may not be the best but it is free+-Seek ye first the kingdom of GOD
	0

05-22-2012, 08:51 PM	#16
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	well. i found the low beam bulb. so basically i put the entire assembly back together. and am mounting some aftermarket fog lights on the sides of the forks. and am in the process of wiring right now.
	0

05-23-2012, 12:56 PM	#20
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	how difficult is the H4 to set up? I'm not to great with wiring but a buddy of mine has been helping me recently.
	0

05-23-2012, 01:12 PM	#21
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	Also. Added these fog lights last night as a temporary fix.
	0

05-24-2012, 02:09 AM	#23
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	what should my bike be idling at. its at 3grand right now.
	0

05-24-2012, 11:00 AM	#24
gloud Join Date: Sep 2011 Location: Westhampton Mass USA Posts: 155	mine is happy at 2K Lower when warm. (1700)
	0

05-24-2012, 09:12 PM	#26
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	has anyone else had a electrical problem. my cluster seems to be surging....
	0

06-03-2012, 01:20 AM	#28
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	i have an urgent problem. i have lost my keys. anyone have any suggestions.
	0

06-03-2012, 01:25 AM	#30
DeadRider89 Join Date: May 2012 Location: Georgia Posts: 29	problem is they dont ship on sundays and i have to get to work monday
	0