Kid crashed Kart, need parts

pistolclass · 09-10-2017, 09:36 PM

So my son clipped fence post with his Monster Moto 80cc Kart doing about 20mph. It spun the Kart and bend the tie rod and the tie rod end. Anyone know where I can get these parts?

He is fine, I upgraded the seat belt to a 5 point harness because I know he will push this little kart.

I also welded a roll cage because it is only a matter of time before the kart is rolled.

FLASHLIGHTBOY · 09-11-2017, 11:09 AM

got any pics of the unit..

FLASHLIGHTBOY · 09-11-2017, 11:17 AM

this go kart is all over the place... lot s of sellers.... just google it... any taotao dealer like killer motors .. and such places.. this is the newest Chinese go kart from CHINA... to sell..

dirtbkr188 · 09-11-2017, 01:39 PM

Maybe something from this page will work for you

FLASHLIGHTBOY · 09-11-2017, 05:15 PM

just make sure you get the right thread... left hand or right hand thread... even the ones for kids atvs will fit.. just check the threads..

pistolclass · 09-12-2017, 10:53 PM

here are some pics, The spindle is bent too:

The last pic is the unbent side for reference.

FLASHLIGHTBOY · 09-12-2017, 11:24 PM

I think it is best to get the parts f rom a dealer who sell this brand and model... they are not ordinary atv parts.. these are for this model.. too bad..

pistolclass · 09-13-2017, 12:04 AM

yeah the dealer is Home Depot.

I can build something from gopowersports.com but was hoping to get exact replacement parts.

BlackBike · 09-13-2017, 03:49 AM

Can't you just bend everything back with a vice. Looks like you already bent that tab back. Straighten out that rod and your good?

pistolclass · 09-13-2017, 07:39 AM

Yes I could bend everything back but If I had the option to just replace the parts I would rather do that.

The last picture is the undamaged side. It must be the camera angle because it is pretty bend still, I haven't touched it yet.

I'm hoping these parts are fairly cheap so if replacing them would be my preferred route.

pistolclass · 09-13-2017, 04:36 PM

I reached out to monstermoto.com and come to find out, they sell the parts. The prices are decent, too. Shipping was a little steep. Here is the breakout:

Shopping cart
Product image Description Quantity Price
90-10056-00 - BOLT, SOCKET HEAD ZINC (M8X30) 1 $0.50
60-10014-00 - AXLE, (SPINDLE) FRONT LEFT 1 $30.00
90-10071-00 - HEIM JOINT, TIE ROD END M8 LH THREAD1 $2.00
90-10051-00 - HEIM JOINT, TIE ROD END M8 RH THREAD1 $2.00
60-10015-00 - TIE ROD, STEERING 1 $3.60
Subtotal $38.10
Shipping $13.00
Total USD $51.10

I will followup when the parts come in.

BlackBike · 09-15-2017, 12:04 AM

Quote:

Originally Posted by pistolclass

I reached out to monstermoto.com and come to find out, they sell the parts. The prices are decent, too. Shipping was a little steep. Here is the breakout:

Shopping cart
Product image Description Quantity Price
90-10056-00 - BOLT, SOCKET HEAD ZINC (M8X30) 1 $0.50
60-10014-00 - AXLE, (SPINDLE) FRONT LEFT 1 $30.00
90-10071-00 - HEIM JOINT, TIE ROD END M8 LH THREAD1 $2.00
90-10051-00 - HEIM JOINT, TIE ROD END M8 RH THREAD1 $2.00
60-10015-00 - TIE ROD, STEERING 1 $3.60
Subtotal $38.10
Shipping $13.00
Total USD $51.10

I will followup when the parts come in.

This was about the funniest he got to me. Never went wild about him like everyone did for a while.

pistolclass · 11-06-2017, 11:33 PM

Kids Kart is all back together. My boy did most of the wrenching. you crash it you wrench it.

Parts that I didn't get with my original order were the bearings that go inside the spindle. I cross referenced the numbers on the bearings and found out that they were just skate board bearings. So for $15 I got 8 of them at a local skate/bike shop.

BTW the bearings were dry! My son and I started to grease up the other bearings.

09-10-2017, 09:36 PM	#1
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Kid crashed Kart, need parts So my son clipped fence post with his Monster Moto 80cc Kart doing about 20mph. It spun the Kart and bend the tie rod and the tie rod end. Anyone know where I can get these parts? He is fine, I upgraded the seat belt to a 5 point harness because I know he will push this little kart. I also welded a roll cage because it is only a matter of time before the kart is rolled.
	0

09-11-2017, 11:09 AM	#2
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	pics got any pics of the unit.. __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	0

09-11-2017, 05:15 PM	#5
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	tie rod end just make sure you get the right thread... left hand or right hand thread... even the ones for kids atvs will fit.. just check the threads.. __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	0

09-12-2017, 11:24 PM	#7
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	spindle I think it is best to get the parts f rom a dealer who sell this brand and model... they are not ordinary atv parts.. these are for this model.. too bad.. __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	0

09-13-2017, 03:49 AM	#9
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	Can't you just bend everything back with a vice. Looks like you already bent that tab back. Straighten out that rod and your good? __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	1

09-11-2017, 01:39 PM	#4
dirtbkr188 Join Date: Aug 2009 Posts: 494	Maybe something from this page will work for you
	0

09-13-2017, 12:04 AM	#8
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	yeah the dealer is Home Depot. I can build something from gopowersports.com but was hoping to get exact replacement parts.
	0

09-13-2017, 07:39 AM	#10
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Yes I could bend everything back but If I had the option to just replace the parts I would rather do that. The last picture is the undamaged side. It must be the camera angle because it is pretty bend still, I haven't touched it yet. I'm hoping these parts are fairly cheap so if replacing them would be my preferred route.
	0

09-13-2017, 04:36 PM	#11
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Update I reached out to monstermoto.com and come to find out, they sell the parts. The prices are decent, too. Shipping was a little steep. Here is the breakout: Shopping cart Product image Description Quantity Price 90-10056-00 - BOLT, SOCKET HEAD ZINC (M8X30) 1 $0.50 60-10014-00 - AXLE, (SPINDLE) FRONT LEFT 1 $30.00 90-10071-00 - HEIM JOINT, TIE ROD END M8 LH THREAD1 $2.00 90-10051-00 - HEIM JOINT, TIE ROD END M8 RH THREAD1 $2.00 60-10015-00 - TIE ROD, STEERING 1 $3.60 Subtotal $38.10 Shipping $13.00 Total USD $51.10 I will followup when the parts come in.
	1

11-06-2017, 11:33 PM	#13
pistolclass Join Date: Oct 2015 Location: connecticut Posts: 978	Kids Kart is all back together. My boy did most of the wrenching. you crash it you wrench it. Parts that I didn't get with my original order were the bearings that go inside the spindle. I cross referenced the numbers on the bearings and found out that they were just skate board bearings. So for $15 I got 8 of them at a local skate/bike shop. BTW the bearings were dry! My son and I started to grease up the other bearings.
	2