Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-28-2016, 10:21 AM   #1
kornleash   kornleash is offline
 
Join Date: Feb 2016
Posts: 5
2006 LFGY-5 200. Needs a new clutch.

Hello and thank you for viewing my post. I bought a used lifan 200 off Craigslist. For the first few days it rode okay but the clutch was "odd" I've had many bikes before this. And it just felt different. I figured maybe it is just the China bike feel. But today I was riding in the woods behind my house and I stopped to hop over a small log. When I went to dump the clutch a little to pop the front wheel over it it just revved and didn't go. Pushed it home and started tearing her apart. I've done clutches before but on v twins. So I split the case and the clutch looks fine. Smells a bit burnt though. Put It back together with new valvoline motorcycle 10w-40. With the chain off I can put it in neutral. Stop the front sprocket and shift into first and I can't stop the sprocket in gear. The sprocket speeds up with the throttle like it should. Put the chain on and put it in first and it doesn't go anywhere. Just revs up. I am thinking I need a new clutch. Any opinions? Ive adjusted the clutch cable all the way in and out. No change. Sorry for the long post. Any input is appreciated. Thanks again.


 
Reply With Quote
Old 05-28-2016, 09:33 PM   #2
humanbeing   humanbeing is offline
 
humanbeing's Avatar
 
Join Date: Mar 2008
Posts: 2,436
ohc (CB) or ohv (CG)?
Depends how it wear... U need some of these https://shop112956451.taobao.com/cat...1025258192.htm (Fraction plate or Whole assembly...) | Tips about vertical (c)honda http://www.mychinamoto.com/forums/sh...ink-Legend-250
__________________



Last edited by humanbeing; 02-04-2017 at 01:00 AM.
 
Reply With Quote
Old 05-29-2016, 09:55 PM   #3
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
It almost sounds like a cable issue. Have you lubed and adjusted the cable?
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 02-03-2017, 08:45 AM   #4
nathan93   nathan93 is offline
 
Join Date: Feb 2015
Posts: 17
I know this thread is probabbly dead but does anyone know where to get a clutch for an 07 lifan grx-200?


 
Reply With Quote
Old 02-03-2017, 12:47 PM   #5
wilserchinarider   wilserchinarider is offline
 
Join Date: Jun 2010
Posts: 380
Bunch of options on Ebay....not exactly sure what you are looking for but I bet it's there...

http://www.ebay.com/itm/Clutch-Assem...kAAOSw-yxU27yA

http://www.ebay.com/itm/Engine-Clutc...xWXFbw&vxp=mtr

I searched "200cc CG clutch"


 
Reply With Quote
Old 02-04-2017, 09:00 PM   #6
ben2go   ben2go is offline
 
Join Date: Jun 2011
Posts: 1,335
Someone has been using automotive oils in the engine and now the clutch slips.


 
Reply With Quote
Old 02-04-2017, 09:38 PM   #7
culcune   culcune is offline
 
culcune's Avatar
 
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
Worse comes to worse, you could try the newly revived American Lifan

http://americanlifan.com/
__________________
"They say that life's a carousel, spinning fast you got to ride it well..."

TGB Delivery Scooter 150
TMEC 200 Enduro--carcass is sadly rotting in the backyard


 
Reply With Quote
Reply

Tags
200, gy-5, lifan



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:00 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.