08-24-2015, 10:57 AM | #16 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Was there any difference after you turned the pilot mixture screw out 2.25 turns, per HB's advice?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-24-2015, 03:06 PM | #17 |
Join Date: Feb 2015
Posts: 75
|
Not really still doing the same thing will not run unless choke is closed and I'm using the throttle it will not idle by its self.l did talk to the someone where I bought the parts at he thinks it's a not getting enough fuel or a valve is stuck open or rings are not setting. Tonight I'm going to do a compression test then do one after that with some oil in the cylinders see what happens.
|
|
08-24-2015, 11:46 PM | #18 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
It never hurts to set the valves, for sure.
What size is the slow jet?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-25-2015, 12:54 AM | #19 | |
Join Date: Mar 2008
Posts: 2,436
|
Quote:
=== No brainier package http://item.taobao.com/item.htm?id=14549102724 2 to 1 thingy | Genuine Keihin carb (Made in China) | FREE throttle cable | Re-jet maybe needed because that's stock CM125 carb…
__________________
Last edited by humanbeing; 08-25-2015 at 08:09 AM. |
|
|
08-25-2015, 08:11 AM | #20 |
Join Date: Feb 2015
Posts: 75
|
Humanbeing that looks just like the carb on this one but two of their would that manifold work with mine ? And how much is it?
I did a compression test as per the the manual both plugs out throttle wide open one had 140 the other 130 + or - few pounds . So I thinks it's not the valves or rings. I would like to get this thing running because I feel it would be fun to ride plus I have all new body parts for it. Thanks |
|
09-17-2015, 12:01 AM | #21 |
Join Date: Feb 2015
Posts: 75
|
humanbeing AJ parts sent me that manifold for free with the carb because I have 2 new ones but that manifold will not bolt up to my motor my bolt go across not some what up and down.So that will not work if someone know how to let me know. What would that motor be clone to?
Last edited by maverickfe; 09-17-2015 at 12:02 AM. Reason: forgot something |
|
|
|
|
|