GIO 110 motor...

pete · 11-07-2016, 01:35 AM

So i now have this new GIO 110 motor eletric start no gears..
my question is .. who makes them...
All it has is GIO on the side covers... even the guy that gave
it to me knows nothing about it.. he bought it for one of those
projects that never happened...

just so happens i have a Dilini 90 3/4 size quad with no motor..
i have a 24mm carb / manifold i bought for the boys 125 pitbike
but never got it on before some brain dead ass hole stole it...

so what are these motor.... i need to find some electrics for it
CDI / coil etc...
try and get some pics of it up 2morrow...

Like I need another project.......

..

Bruce's · 11-07-2016, 07:45 AM

It's a zongshen ,all Gio bikes have them is what I have been told .I have a few of those engines here cut out of quads with the wiring harness intact if you want some wiring info .

Weldangrind · 11-07-2016, 11:23 AM

Does the motor actually say Gio on it? I thought that was a Canadian-only name.

pete · 11-08-2016, 12:55 AM

This be it.......
the guy bought it about 5 years ago...
i should put some power on it..see if it turns over...
if it dose then dig the quad out from under a pile of crap...

Weldangrind · 11-08-2016, 10:43 AM

The tape is still on the intake hole! I bet it'll turn over like new. I recommend that you drain the fish oil out first.

FLASHLIGHTBOY · 11-08-2016, 05:50 PM

the motor is the same as the LONCIN .. LIFAN... AND ZONGSHEN and there is another one .. that this is ,, but I forget,, it is what TAOTAO and GIO and ZSTAR AND many more us.. the number 4 engine in China... TIAHOUZ or something like that... the first is the best... they make motors for HARLEY DAVIDSON .. they told them the quality they want and they make it.. all parts for them are the same. I am puzzle by yhe GIO being there... as they were for export to CANADA as you say..

Bruce's · 11-08-2016, 06:50 PM

Gio used to be a big eBay seller ,and they used to sell complete engines on eBay and even had their own funny auction site .I bet Petes friend just ordered it from Canada .I have won quite a few Gio auctions for one U.S. Penny ,for complete brand new bikes ,and a few hundred shipping of course .

pete · 11-08-2016, 11:51 PM

The gear box part or what ever is in there turns... spin the
sprocket by hand..... Sat it in the quad... made some cardboard
pattens of the rear mounting plates... tomorrows job at work
have a few sheets of 6mm alloy....
BUT the quad has a right side chain.... guess I will need to put
a counter shaft in to move the drive from left to the right side...
theres more than enough room to do it... make the rear mounting
plates big enough to hold 20mm bearings & put the shaft though them...

So are these GIO motors ok....

..

david3921 · 11-09-2016, 12:56 AM

There is writing on the left side, under the sprocket. You can see a bit of it in the first picture. You should be able to tell the manufacturer from that.

pete · 11-09-2016, 01:48 AM

Quote:

Originally Posted by david3921

there is writing on the left side, under the sprocket. You can see a bit of it in the first picture. You should be able to tell the manufacturer from that.

ip52fmh
*8d000624*

.

humanbeing · 11-09-2016, 01:59 AM

It's 1p52fmh http://www.mychinamoto.com/forums/showthread.php?642

Bruce's · 11-09-2016, 04:16 AM

Pete ,any chance you could just flip the entire rear axle over to switch the drive side to the left ?I have done that for years when repowering old European mx bikes .

Bruce's · 11-09-2016, 04:21 AM

Those engines are good ,but with the full auto set up they top out around 25 mph in a Honda mini trail ,they really are not speed demons at all and they are pretty wide .Also ,electric start only so you have to have a good battery system and you cannot push start them either .

pete · 11-09-2016, 11:32 PM

Quote:

Originally Posted by Bruce's

Pete ,any chance you could just flip the entire rear axle over to switch the drive side to the left ?I have done that for years when repowering old European mx bikes .

i did look at that.... possable but i have to build a new caliper mount...

made the engine plates 2day... the shaft is no biggy as i am a tool maker/machinest
so it's all really simple stuff...

..

FLASHLIGHTBOY · 11-10-2016, 12:15 AM

HELLO .. not sure on your setup ,.. but if you have a gear drive on the right side.. and a brake calipher on the left... check the splines on the axle and the other parts and just switch the gear and rotor... I think the spline size is the same... am I understanding you right>>???

11-07-2016, 01:35 AM	#1
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,261	GIO 110 motor... So i now have this new GIO 110 motor eletric start no gears.. my question is .. who makes them... All it has is GIO on the side covers... even the guy that gave it to me knows nothing about it.. he bought it for one of those projects that never happened... just so happens i have a Dilini 90 3/4 size quad with no motor.. i have a 24mm carb / manifold i bought for the boys 125 pitbike but never got it on before some brain dead ass hole stole it... so what are these motor.... i need to find some electrics for it CDI / coil etc... try and get some pics of it up 2morrow... Like I need another project....... .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	0

11-07-2016, 11:23 AM	#3
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Does the motor actually say Gio on it? I thought that was a Canadian-only name. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-08-2016, 12:55 AM	#4
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,261	This be it....... the guy bought it about 5 years ago... i should put some power on it..see if it turns over... if it dose then dig the quad out from under a pile of crap... __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	0

11-08-2016, 10:43 AM	#5
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	The tape is still on the intake hole! I bet it'll turn over like new. I recommend that you drain the fish oil out first. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-08-2016, 05:50 PM	#6
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	motor the motor is the same as the LONCIN .. LIFAN... AND ZONGSHEN and there is another one .. that this is ,, but I forget,, it is what TAOTAO and GIO and ZSTAR AND many more us.. the number 4 engine in China... TIAHOUZ or something like that... the first is the best... they make motors for HARLEY DAVIDSON .. they told them the quality they want and they make it.. all parts for them are the same. I am puzzle by yhe GIO being there... as they were for export to CANADA as you say.. __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	0

11-07-2016, 07:45 AM	#2
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	It's a zongshen ,all Gio bikes have them is what I have been told .I have a few of those engines here cut out of quads with the wiring harness intact if you want some wiring info .
	0

11-08-2016, 06:50 PM	#7
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	Gio used to be a big eBay seller ,and they used to sell complete engines on eBay and even had their own funny auction site .I bet Petes friend just ordered it from Canada .I have won quite a few Gio auctions for one U.S. Penny ,for complete brand new bikes ,and a few hundred shipping of course .
	0

11-08-2016, 11:51 PM	#8
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,261	The gear box part or what ever is in there turns... spin the sprocket by hand..... Sat it in the quad... made some cardboard pattens of the rear mounting plates... tomorrows job at work have a few sheets of 6mm alloy.... BUT the quad has a right side chain.... guess I will need to put a counter shaft in to move the drive from left to the right side... theres more than enough room to do it... make the rear mounting plates big enough to hold 20mm bearings & put the shaft though them... So are these GIO motors ok.... .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	0

11-09-2016, 12:56 AM	#9
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,030	There is writing on the left side, under the sprocket. You can see a bit of it in the first picture. You should be able to tell the manufacturer from that. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

11-09-2016, 01:59 AM	#11
humanbeing Join Date: Mar 2008 Posts: 2,436	It's 1p52fmh http://www.mychinamoto.com/forums/showthread.php?642 __________________
	0

11-09-2016, 04:16 AM	#12
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	Pete ,any chance you could just flip the entire rear axle over to switch the drive side to the left ?I have done that for years when repowering old European mx bikes .
	1

11-09-2016, 04:21 AM	#13
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	Those engines are good ,but with the full auto set up they top out around 25 mph in a Honda mini trail ,they really are not speed demons at all and they are pretty wide .Also ,electric start only so you have to have a good battery system and you cannot push start them either .
	0

11-10-2016, 12:15 AM	#15
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	Drive chain HELLO .. not sure on your setup ,.. but if you have a gear drive on the right side.. and a brake calipher on the left... check the splines on the axle and the other parts and just switch the gear and rotor... I think the spline size is the same... am I understanding you right>>??? __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	0