RC3 wheels

sumbubba · 02-21-2017, 07:25 PM

Does anyone know if the sharp tubeless 17" wheels from the RC3 will fit our RX3's? While they are off it would be easy to have them powdercoated, and for both wheels for about 360 bucks it would just make sense. Not to mention the weight loss.

Jay In Milpitas · 02-21-2017, 07:47 PM

E-mail CSC and ask them, would be my thought.

Dropping down to 17" on your front will seriously alter the bike's handling, maybe good, maybe not good.

culcune · 02-22-2017, 05:46 AM

Owning a basic Chinese enduro that came stock with 17/17 (TMEC 200cc Enduro) I love the size of the wheels. I never take the bike offroad, and use to commute 33 miles a day for over 10k miles on it (it is sitting now, kind of in parts). There are/were other stock 'motard' enduros, with the 17/17 setup out there.

That being said, not sure if the RX3 is set up like a dirt bike vs. something else. My best bet would be to see if Joe Berk is willing to try it if he has a used RC3 sitting around that he could borrow the wheels from to throw on a RX3. My initial 'gut' tells me that it would be a fantastic setup, but not being a bike expert by any means urges caution if the RX3 is significantly different than what most enduros are: dirt bikes.

sumbubba · 02-23-2017, 04:19 PM

The guys at CSC say that the wheels are NOT interchangeable. Crap. I want mag wheels, and tubeless tires.

fjmartin · 02-23-2017, 04:50 PM

Can't help with the mag wheels but Danimal on the ADVRider forum has sent RX3 hubs to Woody's Wheel Works and they are setting up a 17 and 19 wheel for him in tubeless. Woody's is pretty famous in the ADV market for their wheel. Great warranty and service. Pricey though!

BlackBike · 02-23-2017, 11:30 PM

I'm already up to around 80 spent on tubes . I should have just jumped in withe the tubliss gen 2 system 2 wheels around 150. Looks good to me

jbfla · 02-23-2017, 11:34 PM

Quote:

Originally Posted by sumbubba

Does anyone know if the sharp tubeless 17" wheels from the RC3 will fit our RX3's? While they are off it would be easy to have them powdercoated, and for both wheels for about 360 bucks it would just make sense. Not to mention the weight loss.

I have seen RX3's with cast wheels on Taobao.

So they should be available to CSC.

jb

Huck369 · 02-24-2017, 07:34 AM

Quote:

Originally Posted by jbfla

I have seen RX3's with cast wheels on Taobao.

So they should be available to CSC.

jb

The RX3 cast wheels are 18" front and 16" rear, but are out there

sumbubba · 03-12-2017, 07:45 PM

I'm beggin ya, please define "out there".

jbfla · 03-13-2017, 01:02 AM

Quote:

Originally Posted by sumbubba

I'm beggin ya, please define "out there".

In China....they should be available on Tao Bao, but the shipping to the US may be expensive....It's based on weight and size.

jb

Ron B · 03-13-2017, 09:24 AM

zongshen does make them for a couple of countries specs.

BlackBike · 03-13-2017, 04:49 PM

Interesting ron...you would think csc would provide these as an option. I'm sure it will eventually be addressed. After all, young company (2015 with these bikes).

fjmartin · 03-13-2017, 08:17 PM

Maybe they haven't because the rear is 15" rather than what was spec'd in the US with a 17????????????

BlackBike · 03-13-2017, 09:40 PM

Quote:

Originally Posted by fjmartin

Maybe they haven't because the rear is 15" rather than what was spec'd in the US with a 17????????????

Your probably right

Those look like pretty good size wheels on ron's post, would you agree??

02-21-2017, 07:25 PM	#1
sumbubba Join Date: Sep 2016 Posts: 5	RC3 wheels Does anyone know if the sharp tubeless 17" wheels from the RC3 will fit our RX3's? While they are off it would be easy to have them powdercoated, and for both wheels for about 360 bucks it would just make sense. Not to mention the weight loss.
	1

02-22-2017, 05:46 AM	#3
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	Owning a basic Chinese enduro that came stock with 17/17 (TMEC 200cc Enduro) I love the size of the wheels. I never take the bike offroad, and use to commute 33 miles a day for over 10k miles on it (it is sitting now, kind of in parts). There are/were other stock 'motard' enduros, with the 17/17 setup out there. That being said, not sure if the RX3 is set up like a dirt bike vs. something else. My best bet would be to see if Joe Berk is willing to try it if he has a used RC3 sitting around that he could borrow the wheels from to throw on a RX3. My initial 'gut' tells me that it would be a fantastic setup, but not being a bike expert by any means urges caution if the RX3 is significantly different than what most enduros are: dirt bikes. __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

02-23-2017, 04:50 PM	#5
fjmartin Join Date: Sep 2016 Location: Redmond, WA. Posts: 534	Can't help with the mag wheels but Danimal on the ADVRider forum has sent RX3 hubs to Woody's Wheel Works and they are setting up a 17 and 19 wheel for him in tubeless. Woody's is pretty famous in the ADV market for their wheel. Great warranty and service. Pricey though! __________________ 2017 BMW F800GS Adventure
	0

02-23-2017, 11:30 PM	#6
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	I'm already up to around 80 spent on tubes . I should have just jumped in withe the tubliss gen 2 system 2 wheels around 150. Looks good to me __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

03-13-2017, 04:49 PM	#12
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	Interesting ron...you would think csc would provide these as an option. I'm sure it will eventually be addressed. After all, young company (2015 with these bikes). __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

02-21-2017, 07:47 PM	#2
Jay In Milpitas Join Date: Jul 2015 Location: Milpitas, CA. USA Posts: 775	E-mail CSC and ask them, would be my thought. Dropping down to 17" on your front will seriously alter the bike's handling, maybe good, maybe not good.
	1

02-23-2017, 04:19 PM	#4
sumbubba Join Date: Sep 2016 Posts: 5	The guys at CSC say that the wheels are NOT interchangeable. Crap. I want mag wheels, and tubeless tires.
	0

03-12-2017, 07:45 PM	#9
sumbubba Join Date: Sep 2016 Posts: 5	I'm beggin ya, please define "out there".
	0

03-13-2017, 08:17 PM	#13
fjmartin Join Date: Sep 2016 Location: Redmond, WA. Posts: 534	Maybe they haven't because the rear is 15" rather than what was spec'd in the US with a 17???????????? __________________ 2017 BMW F800GS Adventure
	0