JerryHawk250's Lifan KPX250 - Page 35

letsride · 06-08-2023, 12:47 PM

The RK 108 link O ring chain does fit with the JT 14 tooth front sprocket, but you have to run the chain adjusters (bolts) all the way forward and slide the axle all the way forward. Even still it is a tight fit. But no worries it left plenty of room for adjustment. And after one block down the street the chain settled in nicely and I was able to obtain the correct adjustment. And the 14 tooth front sprocket took my rpm of 6,000 at 55 mph to right around 5,500. I'll take it. The 14 tooth also doesn't seem affects off road capability that much either. So a good investment I think. I have been riding the bike almost every day back and forth to work, 25 miles one way. And she is averaging 78 MPG with my big butt on it LOL.

**JerryHawk250** · 06-08-2023, 01:01 PM

Quote:

Originally Posted by letsride

The RK 108 link O ring chain does fit with the JT 14 tooth front sprocket, but you have to run the chain adjusters (bolts) all the way forward and slide the axle all the way forward. Even still it is a tight fit. But no worries it left plenty of room for adjustment. And after one block down the street the chain settled in nicely and I was able to obtain the correct adjustment. And the 14 tooth front sprocket took my rpm of 6,000 at 55 mph to right around 5,500. I'll take it. The 14 tooth also doesn't seem affects off road capability that much either. So a good investment I think. I have been riding the bike almost every day back and forth to work, 25 miles one way. And she is averaging 78 MPG with my big butt on it LOL.

Awesome!

Thanks for posting the update. I need to take my KPX out. She been sitting in the shed for a couple of weeks because I've been using the Vulcan S to commute back and forth from work.

Bobafett123 · 06-10-2023, 09:00 AM

Quote:

Originally Posted by jazzybike58

Here are some pics.

Where did you go buy it at Jazzy

**JerryHawk250** · 08-28-2023, 02:17 PM

I've had several request to make a video on how to remove the seat. It's easy but not obvious. It took me a while to figure it out.

TominMO · 08-28-2023, 03:12 PM

Good vid. I don't remove the rear luggage rack 6mm screws, just loosen 'em so I can rotate the rack upwards at the front. Did the same thing as you did with the upper screw on the black plastic piece (one on each side) that makes you have to remove the seat in the first place.

IdahoRider · 08-31-2023, 04:03 PM

Best comprehensive review of the KPX I've seen so far, but not sure how he's getting a "5 year 11,185 mile warranty". I also see TXPowersports is charging extra for a parts and engine warranty that is less time than the bike already comes with!

Fphritz · 10-07-2023, 12:29 PM

Hey guys, newcomer to the forum.

How does a person go about getting spare parts for this bike?

Do you just call the dealer and hope they can get some ordered for you?

Anyone have any experience with needing a replacement part and getting it delivered?

My concern about getting this bike is not being able to keep it on the road (particularly after the warranty period) with various possible wear items (like say, a stator) going out at some point and needing a replacement. I'm okay with a little DIY, but I'm not that mechanically savvy

It seems to me there's a lot more readily available parts for something like the hawk, so maybe if I have this concern I should get one of those bikes instead?

**JerryHawk250** · 10-07-2023, 12:31 PM

Quote:

Originally Posted by Fphritz

Hey guys, newcomer to the forum.

How does a person go about getting spare parts for this bike?

Do you just call the dealer and hope they can get some ordered for you?

Anyone have any experience with needing a replacement part and getting it delivered?

My concern about getting this bike is not being able to keep it on the road (particularly after the warranty period) with various possible wear items (like say, a stator) going out at some point and needing a replacement. I'm okay with a little DIY, but I'm not that mechanically savvy

It seems to me there's a lot more readily available parts for something like the hawk, so maybe if I have this concern I should get one of those bikes instead?

Contact the dealer or American Lifan direct. Parts are available.

**JerryHawk250** · 10-17-2023, 03:24 PM

Just some more boring video of some old guy on a KPX.

bigdano711 · 10-18-2023, 11:35 AM

Thank you for teaching me how to mount my bike! Before I put the seat bag on the back, it wasn't really an issue to throw my leg over. Sure, I have to stretch for five minutes before-hand, but not really an issue. As soon as I put that bag on, things got interesting. I've been throwing a front kick at the seat, barely clearing it, getting my ankle over the seat and throwing myself sideways. No good for old fat guy with scoliosis.

I was just outside, in my slippers, and decided to try your mounting method. Genius!

**JerryHawk250** · 10-18-2023, 11:50 AM

Quote:

Originally Posted by bigdano711

Thank you for teaching me how to mount my bike! Before I put the seat bag on the back, it wasn't really an issue to throw my leg over. Sure, I have to stretch for five minutes before-hand, but not really an issue. As soon as I put that bag on, things got interesting. I've been throwing a front kick at the seat, barely clearing it, getting my ankle over the seat and throwing myself sideways. No good for old fat guy with scoliosis.

I was just outside, in my slippers, and decided to try your mounting method. Genius!

LOL, Yeah, the KPX is so much taller than my other bikes. The first time I tried to mount it I was like I need to figure out a way to get on this bike. Not young as i use to be and can't do the round house kicks anymore. lol

Bill Hilly · 10-18-2023, 12:27 PM

I ordered a tailbag for mine the other day when they had a sale on Amazon, it came in yesterday, and I mounted it, and it definitely makes the bike harder to swing a leg over. I flip the kickstand up, and tilt the bike towards me when I get on, or off of the bike. I will try that method of standing on the peg.

IdahoRider · 10-18-2023, 01:55 PM

I've had a HarborFreight 3800 weatherproof box mounted on my rear rack for the last year and its worked great. About $50 for the case on sale and stainless steel mounting hardware. I added some webbing loops so I'm able to strap things on top if needed.

https://www.amazon.com/H2o-Webbing-Bridge-Nylon-Footmans/dp/B00APXK61A/ref=sr_1_42?crid=3LCODAG1KARFK&keywords=kayak+plas tic+loops&qid=1697651582&sprefix=kayak+plastic+loo ps%2Caps%2C186&sr=8-42

https://www.harborfreight.com/home/s...ack-63927.html

Click image for larger version

Name: Case1.jpg
Views: 33
Size: 130.7 KB
ID: 30216

Click image for larger version

Name: Case2.jpg
Views: 32
Size: 104.1 KB
ID: 30217

Click image for larger version

Name: Case3.jpg
Views: 18
Size: 195.2 KB
ID: 30218

bigdano711 · 10-18-2023, 02:26 PM

Quote:

Originally Posted by JerryHawk250

LOL, Yeah, the KPX is so much taller than my other bikes. The first time I tried to mount it I was like I need to figure out a way to get on this bike. Not young as i use to be and can't do the round house kicks anymore. lol

LMAO Why do I see Will Ferrell's face saying I'M GONNA ROUND HOUSE YER ASS!!??

Discoveror · 10-22-2023, 11:24 AM

What is the KPX250 suspension travel (front & rear) ? ... approximately?

What alternative KPX250 suspension damping adjustment options (front & rear) exist? ... vendors?

06-08-2023, 12:47 PM	#511
letsride Join Date: Oct 2013 Location: Leesville SC Posts: 832	The RK 108 link O ring chain does fit with the JT 14 tooth front sprocket, but you have to run the chain adjusters (bolts) all the way forward and slide the axle all the way forward. Even still it is a tight fit. But no worries it left plenty of room for adjustment. And after one block down the street the chain settled in nicely and I was able to obtain the correct adjustment. And the 14 tooth front sprocket took my rpm of 6,000 at 55 mph to right around 5,500. I'll take it. The 14 tooth also doesn't seem affects off road capability that much either. So a good investment I think. I have been riding the bike almost every day back and forth to work, 25 miles one way. And she is averaging 78 MPG with my big butt on it LOL. __________________ My Stable- 2022 Lifan KPX250 , 2023 Royal Enfield Himalayan, 1992 Honda GL1500 Goldwing, SSR 70 Auto, Kymco Mongoose 90, Honda Four Trax 300
	2

08-28-2023, 02:17 PM	#514
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,559	I've had several request to make a video on how to remove the seat. It's easy but not obvious. It took me a while to figure it out. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

08-28-2023, 03:12 PM	#515
TominMO Join Date: Sep 2021 Location: De Soto, MO Posts: 1,871	Good vid. I don't remove the rear luggage rack 6mm screws, just loosen 'em so I can rotate the rack upwards at the front. Did the same thing as you did with the upper screw on the black plastic piece (one on each side) that makes you have to remove the seat in the first place. __________________ 2021 Lifan Xpect--sold 2022 Lifan KPX 1972 Honda CT90--The Carrot 1969 Honda CT90--The Tomahto Cheesy is the WDK (workplace drama king). Now retired. Nope, back in the saddle. Climate: The Movie https://www.youtube.com/watch?v=A24fWmNA6lM How our government really works https://www.youtube.com/watch?v=QjadCd0VRBw Question all authority.....think for yourself
	1

08-31-2023, 04:03 PM	#516
IdahoRider Join Date: Aug 2022 Posts: 174	Motocheez KPX 250 Review Best comprehensive review of the KPX I've seen so far, but not sure how he's getting a "5 year 11,185 mile warranty". I also see TXPowersports is charging extra for a parts and engine warranty that is less time than the bike already comes with! __________________ 2022 Lifan KPX 250
	1

10-07-2023, 12:29 PM	#517
Fphritz Join Date: Oct 2023 Posts: 2	Getting Spare Parts Hey guys, newcomer to the forum. How does a person go about getting spare parts for this bike? Do you just call the dealer and hope they can get some ordered for you? Anyone have any experience with needing a replacement part and getting it delivered? My concern about getting this bike is not being able to keep it on the road (particularly after the warranty period) with various possible wear items (like say, a stator) going out at some point and needing a replacement. I'm okay with a little DIY, but I'm not that mechanically savvy It seems to me there's a lot more readily available parts for something like the hawk, so maybe if I have this concern I should get one of those bikes instead?
	0

10-17-2023, 03:24 PM	#519
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,559	Just some more boring video of some old guy on a KPX. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	4

10-18-2023, 11:35 AM	#520
bigdano711 Join Date: Jun 2023 Location: Big Piney, WY Posts: 423	Thank you for teaching me how to mount my bike! Before I put the seat bag on the back, it wasn't really an issue to throw my leg over. Sure, I have to stretch for five minutes before-hand, but not really an issue. As soon as I put that bag on, things got interesting. I've been throwing a front kick at the seat, barely clearing it, getting my ankle over the seat and throwing myself sideways. No good for old fat guy with scoliosis. I was just outside, in my slippers, and decided to try your mounting method. Genius! __________________ 2023 Hawk 250 from XPRO off of Amazon MOUNTAIN MAN RC + MOTO on YouTube "If there were more bloody noses, there would be less wars." - Hagbard Celine "Someday, after mastering the waves, the winds, the tides and gravity, we shall harness for God the energies of love and then, for the second time in the history of the world, man will have discovered fire." - Pierre Teilhard de Chardin
	3

10-18-2023, 12:27 PM	#522
Bill Hilly Join Date: Feb 2021 Posts: 934	I ordered a tailbag for mine the other day when they had a sale on Amazon, it came in yesterday, and I mounted it, and it definitely makes the bike harder to swing a leg over. I flip the kickstand up, and tilt the bike towards me when I get on, or off of the bike. I will try that method of standing on the peg.
	1

10-18-2023, 01:55 PM	#523
IdahoRider Join Date: Aug 2022 Posts: 174	I've had a HarborFreight 3800 weatherproof box mounted on my rear rack for the last year and its worked great. About $50 for the case on sale and stainless steel mounting hardware. I added some webbing loops so I'm able to strap things on top if needed. https://www.amazon.com/H2o-Webbing-Bridge-Nylon-Footmans/dp/B00APXK61A/ref=sr_1_42?crid=3LCODAG1KARFK&keywords=kayak+plas tic+loops&qid=1697651582&sprefix=kayak+plastic+loo ps%2Caps%2C186&sr=8-42 https://www.harborfreight.com/home/s...ack-63927.html __________________ 2022 Lifan KPX 250
	2

10-22-2023, 11:24 AM	#525
Discoveror Join Date: Nov 2022 Location: Wyoming Posts: 88	KPX250 suspension? What is the KPX250 suspension travel (front & rear) ? ... approximately? What alternative KPX250 suspension damping adjustment options (front & rear) exist? ... vendors?
	0