Front and rear axle nuts. What size?

Danimal · 10-02-2015, 12:54 PM

Title says it all. Anyone?

Danimal · 10-02-2015, 02:03 PM

not looking at thread size or pitch...just the outer nut size

SpudRider · 10-02-2015, 04:25 PM

I believe the front axle nut fits a 19 mm socket. I always use a pair of crescent wrenches to remove the rear axle.

rtking · 10-02-2015, 04:39 PM

On the rear, it is 17mm (nut) and 18mm (bolt head) per the CSC tutorial:

http://www.cscmotorcycles.com/Articles.asp?ID=257

Jay In Milpitas · 10-02-2015, 06:21 PM

Quote:

Originally Posted by Danimal

not looking at thread size or pitch...just the outer nut size

Just went out & measured.
Both front & rear axle nuts are 19mm, 3/4" will also fit (I tested).
Rear axle head is 18mm. 11/16" may or may not fit, depends on tolerance of the wrench/socket.

Hope this helped.

________________________
If it doesn't say "Made in China" it's probably counterfeit.

rtking · 10-02-2015, 10:52 PM

Thank you, Jay! You are correct 19mm nuts, 18mm bolt head (rear only).

10-02-2015, 12:54 PM	#1
Danimal Banned Join Date: Sep 2015 Posts: 176	Front and rear axle nuts. What size? Title says it all. Anyone?
	0

10-02-2015, 04:25 PM	#3
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	I believe the front axle nut fits a 19 mm socket. I always use a pair of crescent wrenches to remove the rear axle. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

10-02-2015, 02:03 PM	#2
Danimal Banned Join Date: Sep 2015 Posts: 176	not looking at thread size or pitch...just the outer nut size
	0

10-02-2015, 04:39 PM	#4
rtking Join Date: Sep 2014 Location: Orange County, CA Posts: 410	On the rear, it is 17mm (nut) and 18mm (bolt head) per the CSC tutorial: http://www.cscmotorcycles.com/Articles.asp?ID=257
	0

10-02-2015, 10:52 PM	#6
rtking Join Date: Sep 2014 Location: Orange County, CA Posts: 410	Thank you, Jay! You are correct 19mm nuts, 18mm bolt head (rear only).
	0