Issues in Nebraska

Whisky · 09-05-2018, 02:02 AM

Went to register my bike yesterday and clerk said I need a title in dealers name. The Certificate of Origin is not enough. I contacted Venom motorsports and they said they will ups me what I needed. I guess we will see. Hope it comes out ok otherwise I have a 258lb brick.

Emerikol · 09-05-2018, 06:16 AM

Whisky, I had very similar issues when I went to register my Hawk back in Georgia. Don't despair quite yet, you may need to get creative to get it registered. Also, try another DMV, if that's an option for you. The people on the other side of the counter usually have no idea what to do with a vehicle that isn't made by a big name brand and fits easily into their button pushing routine. I've been hearing good things about Venom lately, so give them a chance to make it right. Keep us posted on how it all shakes out.

kirbo7106 · 09-05-2018, 11:09 AM

When I went to register my Hawk in Florida, the person at DMV had to do a little digging. She actually had to get help from another clerk, but she gott’er done!

See what Venom will do. Like Emerikol said, try another DMV!

Keep us posted!

cbrfxr67 · 09-05-2018, 03:55 PM

In HOuston here I had same experience. The broad didn't know what to do with a Jiangsu Baodiao. She asked her manager who told her to go look it up. She had me wait while she flipped through screen after screen on her monitor.
Finally she said the dealer's name not on the paperwork was an issue and said that I needed a bonded title. bs I sent off my packet to Vermont and got my plate in a week later. Still need to go transfer it over to TX but I'm legal in the meantime,...

Whisky · 09-06-2018, 04:26 AM

It is BS for sure. According to my local DMV website, I have every document listed to register it. It says I would need a title in the dealers name only on a used bike. I'm guessing they don't like the MCO due to the bottom portion is filled out in Chinese. I will just have to wait and see. I do have another DMV office to try if all else fails.

**JerryHawk250** · 09-06-2018, 08:40 AM

Quote:

Originally Posted by Whisky

It is BS for sure. According to my local DMV website, I have every document listed to register it. It says I would need a title in the dealers name only on a used bike. I'm guessing they don't like the MCO due to the bottom portion is filled out in Chinese. I will just have to wait and see. I do have another DMV office to try if all else fails.

Do you have Title/Notary Shops where you live? These people will put the time and effort in getting it done so they can collect there money. I refuse to go to the DMV and wait hours to get something done and only to find out you need xyz form. The little extra fee these shop charge is worth every penny. It took me 20 minutes top to get my Hawk tagged and registered.

Whisky · 09-06-2018, 02:59 PM

Venom sent me the Doc`s I needed, got them today, went back to DMV and 10 minutes later got my plates. I really got to praise Venom Motorsports for stepping up and rushing to help a customer out. They could have given me the run around like some other places have done to others. All is good now.

cbrfxr67 · 09-06-2018, 03:32 PM

sweet! winning!

culcune · 09-06-2018, 09:48 PM

Quote:

Originally Posted by cbrfxr67

sweet! winning!

Making Chinese bikes great again!!

jsumd · 09-08-2018, 01:06 PM

I have to agree, even at this early stage in my order, venom is far outweighing my last experience with powersportsmax.

09-05-2018, 02:02 AM	#1
Whisky Join Date: Aug 2018 Posts: 286	Issues in Nebraska Went to register my bike yesterday and clerk said I need a title in dealers name. The Certificate of Origin is not enough. I contacted Venom motorsports and they said they will ups me what I needed. I guess we will see. Hope it comes out ok otherwise I have a 258lb brick.
	2

09-05-2018, 06:16 AM	#2
Emerikol Join Date: Oct 2016 Location: Carrollton, GA Posts: 1,465	Whisky, I had very similar issues when I went to register my Hawk back in Georgia. Don't despair quite yet, you may need to get creative to get it registered. Also, try another DMV, if that's an option for you. The people on the other side of the counter usually have no idea what to do with a vehicle that isn't made by a big name brand and fits easily into their button pushing routine. I've been hearing good things about Venom lately, so give them a chance to make it right. Keep us posted on how it all shakes out. __________________ First Rule of Aviation: -Never Pass Up The Opportunity to Pee I was struggling to get my wife's attention; I sat down on the couch and looked comfortable. That did the trick! My wife says I only have two faults. I don't listen and something else... If at first you don't succeed, try doing it the way I told you to... The Stable: 2005 Yamaha V-Star 650 - SOLD 2015 Suzuki DR 650 2015 RPS Hawk 250 - SOLD 2016 Ural Gear Up
	1

09-05-2018, 11:09 AM	#3
kirbo7106 Join Date: Feb 2017 Location: Holiday, Florida Posts: 672	When I went to register my Hawk in Florida, the person at DMV had to do a little digging. She actually had to get help from another clerk, but she gott’er done! See what Venom will do. Like Emerikol said, try another DMV! Keep us posted! __________________ Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat
	1

09-05-2018, 03:55 PM	#4
cbrfxr67 Join Date: Jun 2018 Location: HOuston Posts: 357	In HOuston here I had same experience. The broad didn't know what to do with a Jiangsu Baodiao. She asked her manager who told her to go look it up. She had me wait while she flipped through screen after screen on her monitor. Finally she said the dealer's name not on the paperwork was an issue and said that I needed a bonded title. bs I sent off my packet to Vermont and got my plate in a week later. Still need to go transfer it over to TX but I'm legal in the meantime,... __________________ BD125-15
	2

09-06-2018, 02:59 PM	#7
Whisky Join Date: Aug 2018 Posts: 286	Venom sent me the Doc`s I needed, got them today, went back to DMV and 10 minutes later got my plates. I really got to praise Venom Motorsports for stepping up and rushing to help a customer out. They could have given me the run around like some other places have done to others. All is good now. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	5

09-06-2018, 04:26 AM	#5
Whisky Join Date: Aug 2018 Posts: 286	It is BS for sure. According to my local DMV website, I have every document listed to register it. It says I would need a title in the dealers name only on a used bike. I'm guessing they don't like the MCO due to the bottom portion is filled out in Chinese. I will just have to wait and see. I do have another DMV office to try if all else fails.
	1

09-06-2018, 03:32 PM	#8
cbrfxr67 Join Date: Jun 2018 Location: HOuston Posts: 357	sweet! winning! __________________ BD125-15
	1

09-08-2018, 01:06 PM	#10
jsumd Join Date: Feb 2017 Posts: 418	I have to agree, even at this early stage in my order, venom is far outweighing my last experience with powersportsmax. __________________ 2002 Harley Davidson XL883R 2012 Yamaha FZ6 2022 Hawk 250 2002 Yamaha R6 sold Vader 125cc sold after owning for many years 1997 Jeep Wrangler sold due to frame rot
	0