12-31-2014, 11:55 PM | #10 |
Join Date: Mar 2014
Location: Mexico
Posts: 134
|
I had to remove the engine because I learned that bolts have a flange (not sure if about the right name) on the low position. This made it impossible to remove it (sorry for the crappy pic).
Then, I remove the engine and found valves are dirty piston same as valves Also I found a hole in the cylinder head (upper right side). Probably, this is affecting the performance of the engine and don´t know if the hole must be fixed. Finally, I went to the shop asking about rebor and the machinist said yes but will do it until next Monday due to holidays. Feedback is welcome.
__________________
Hector Mountrack Vento 2006 |
|
|
|
|
|