|
10-22-2023, 01:19 PM | #1 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,085
|
Well doesn't that just suck.......
I've had to do the "phone the wife" from the shop. It's never a good situation.
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 |
|
10-23-2023, 07:27 AM | #2 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
First thing out of her mouth after the excitement was, "You just got a new truck, you can't get a new motorcycle." That hadn't crossed my mind at the time, though I wanted to say that I have a new truck because you needed a bigger trailer, but I sometimes know when to keep my mouth shut.
Anyway, plans are afoot to repair the broken ball stud. Clamp, tack, gouge, weld. If that fails, I have located a 2010 frame in Ohio for a not unreasonable fee. If I go that route, that's where the most expensive words in the English language, "While I'm in here..." come into play. New clutch set, trans bearings, headset bearings, etc. We shall see.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-23-2023, 09:57 AM | #3 | |
Join Date: Jun 2023
Location: Big Piney, WY
Posts: 423
|
Quote:
Wisdom. When I see it, I call it out!
__________________
2023 Hawk 250 from XPRO off of Amazon MOUNTAIN MAN RC + MOTO on YouTube "If there were more bloody noses, there would be less wars." - Hagbard Celine "Someday, after mastering the waves, the winds, the tides and gravity, we shall harness for God the energies of love and then, for the second time in the history of the world, man will have discovered fire." - Pierre Teilhard de Chardin |
|
|
10-23-2023, 08:58 AM | #4 |
Join Date: Jan 2016
Location: Mooresville NC
Posts: 2,038
|
used Triumph and DMC sidecar. just sayin.....
__________________
Dave Bikes I've owned: Suzuki GS450T, Yamaha XS500, Honda V45 Sabre, Kawasaki Vulcan 1500 Classic (2), Suzuki VX800, Kawasaki Ninja 650, Triumph TT600, Honda Superhawk, Kawasaki Concours 1000 (3, including a sidecar rig), Buell XB9R, Kawasaki Nomad 1500, Concours 14, Honda Goldwing (2), Housen Hawk, Suzuki Intruder 1400, Kawasaki KLR650, Victory V92TC. |
|
10-23-2023, 10:31 AM | #5 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
No reverse and no 2wd.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-23-2023, 01:16 PM | #6 |
Join Date: Jan 2016
Location: Mooresville NC
Posts: 2,038
|
and no rusting out, and no major motor rebuilds.
__________________
Dave Bikes I've owned: Suzuki GS450T, Yamaha XS500, Honda V45 Sabre, Kawasaki Vulcan 1500 Classic (2), Suzuki VX800, Kawasaki Ninja 650, Triumph TT600, Honda Superhawk, Kawasaki Concours 1000 (3, including a sidecar rig), Buell XB9R, Kawasaki Nomad 1500, Concours 14, Honda Goldwing (2), Housen Hawk, Suzuki Intruder 1400, Kawasaki KLR650, Victory V92TC. |
|
10-23-2023, 05:24 PM | #7 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
Success, I think.
Tacked. I didn't take pics of the process because that meant repeatedly taking off my gloves. I tacked, gouged to the center between the tacks, made several passes, let it cool, gouged between the next and last tacks, removing those in the process, filled, repeat. Took about 5 hours, and that was from the time I opened the barn doors, backed the expensive toys out, moved the Ural to the other bay, made sparks and smoke, moved the Ural back, brought the toys back in, and closed the doors. Seth pestered me a few times, too. Finished. It looks better than in the pic. Nekkid Ural. Hopefully, he says, back together by Thursday. I have a new sidecar shaft boot on order, promised for tomorrow. That tore when the two parted company. I need that before I can pair them back together. In the meantime, while the tank is off, I'll replace the throttle cables. I think those are original.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-24-2023, 09:51 AM | #9 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
My preference is a good single malt or dark rum, but point taken.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-25-2023, 10:43 AM | #10 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
The throttle cables were a pain in the butt. At least that's done. Everything else; carbs, exhaust, and fuel tank are back on. Just waiting on the damn boot that now won't be here until Friday.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-26-2023, 09:06 PM | #11 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
All back together, save for the new boot. As a plus, no left over parts.
I didn't bother firing it up, that's for tomorrow. I will say that my knee has noticed a marked increase in compression when I kicked it over. I used Lubriplate Engine assembly lube when I stuck it together, so it ought to smoke like a 2 stroke tomorrow after Buster gets his walk.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-27-2023, 09:37 PM | #12 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
We were mostly successful. Ran about 5 miles to seat the rings. A lot more giddyup. I think it could beat the DeSoto now.
I'll re-torque the heads and readjust the valves in the morning. Three minutes of your life you won't get back.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
10-28-2023, 02:00 AM | #13 |
Join Date: Mar 2010
Location: Volcano, Ca
Posts: 7,085
|
Thanks cheesy! I'll be doing the same tomorrow with the RE now that my parts arrived today......but hopefully it will take less kicks....and well....my butt isn't as cute as yours in jeans. ;-p
__________________
"Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350 |
|
10-28-2023, 08:49 AM | #14 | |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
Quote:
The first 10 were with the key off, just to get some oil moving around. I was getting a bit miffed, though, that it took that many kicks to get it going. I was starting to think it was going to be the engine rebuild my Dad did on his 47 Hudson pickup back in the early sixties. We had to tow that SOB to get it to start the first time. It's back to its usual 1 or 2 kicks now.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
|
11-03-2023, 06:21 PM | #15 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,801
|
So, one step forward, two steps back. At least until today.
I was having all sorts of issues with the right cylinder and thought that I may have effed something up. I did, kinda, but I got that fixed. I brain farted on the fuel screw adjustment on the carbs. It's 1.5 turns out in the summer and 2 in the cold months. Not 2 and 2.5. So I was running pretty rich. Then the right cylinder started doing nothing at all. Well, it was flooding, so I guess that's something. Anyway, I pulled that carb and yanked the bowl. Float height is supposed to be 15.5mm. Why the hell is this one at 17.5mm? I pulled the float and the needle and found a piece of white plastic partially blocking the seat. The only thing between the carb and the tank is a fuel filter. I cut the filter open and the plastic on the downstream side of the internal filter is de-laminating. Sunuva... So, I yanked both fuel filters and shit canned them. The extras of the same brand followed those into the trash. I found a couple of B&S inline filters in my stash and will use these for the time being. Once I got the crud out of the carb and back together, I put it back on Arpok, kicked the engine over, and got an instant, if smokey, start that settled down into a smooth idle. Both exhaust pipes were burny to the touch. Yay? Got the carbs balanced again and we are back to a one kick start again. Thanks to the aftermarket and oval pushrod tube seals I have, I have a good(bad)oil leak that I'm dealing with and have almost got that fixed. So all I have left to do is the front hub to replace.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
|
|
|
|