Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX3
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 11-29-2015, 12:27 AM   #1
justinope   justinope is offline
 
Join Date: Nov 2015
Posts: 19
How's the seat?

Hey, I'm pretty much set on buying this bike and one of the biggest reasons is the seat height being so low with my short inseam of a whopping 28 inches! 31" is perfect for me and my girlfriend both.

My question though is if the seat is very comfortable at all? I've honestly had over 10 or 12 different bikes never felt a seat that was comfortable really except my 2007 V-Strom (stock by the way). Whats the general consensus? Is it a must replace like so many other bikes? No real great options? etc?

It's the only real concern I have. Thanks!


 
Reply With Quote
Old 11-29-2015, 12:37 AM   #2
Jay In Milpitas   Jay In Milpitas is offline
 
Jay In Milpitas's Avatar
 
Join Date: Jul 2015
Location: Milpitas, CA. USA
Posts: 775
Some have lived with it, some have personalized, some have bought custom from CSC.

It's all down to the individual.


 
Reply With Quote
Old 11-29-2015, 12:41 AM   #3
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Personally, the saddle doesn't bother me at all. I ride all day on the stock saddle, without compaints. However, as Jay stated, it's purely a personal matter.

If you don't like the stock saddle, CSC is selling both narrow, and tall versions of an aftermarket saddle.

http://www.cscmotorcycles.com/SEATS-s/208.htm
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894



Last edited by SpudRider; 11-29-2015 at 04:56 AM.
 
Reply With Quote
Old 11-29-2015, 12:46 AM   #4
justinope   justinope is offline
 
Join Date: Nov 2015
Posts: 19
gotcha, I just am so used to bikes where the stock saddle is generally agreed to feel like a board. for example the WR250R, ktm 950 adv, terra 650, etc, etc

good to know some people find it comfy, hopefully I'll love it like I did my stock v-strom

and wow thanks for responding so quickly, nice to know theres such an active community behind the bike!


 
Reply With Quote
Old 11-29-2015, 12:57 AM   #5
Jay In Milpitas   Jay In Milpitas is offline
 
Jay In Milpitas's Avatar
 
Join Date: Jul 2015
Location: Milpitas, CA. USA
Posts: 775
Justinope, don't know where you reside, have you seen an RX3 in person?

By the way, most of the time I'm okay with the stock seat padding other than the scoop shape. Sometimes it makes me rock my pelvis forward and causes discomfort to the *software*. Cold weather it's not so bad, if you get my drift.

All over the different forums and on Facebook, you will find other RX3 riders simply having fun and enjoying these neat little machines. Some even own V-Stroms.


 
Reply With Quote
Old 11-29-2015, 01:08 AM   #6
justinope   justinope is offline
 
Join Date: Nov 2015
Posts: 19
I havent gotten to see one in person, I'm kinda buying it off the spec sheet really. there is one nearby in richmond someone offered to show me though so I may head down there sometime and take him up on that!

I'm in lynchburg, VA so it does get cold!


 
Reply With Quote
Old 11-29-2015, 12:50 AM   #7
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Incidentally, welcome to these forums. We are glad you joined us.

I don't think the stock saddle is hard. However, I've been told I have an 'iron butt.'
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 11-29-2015, 01:21 AM   #8
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Cold is a relative term. When I awakened Thanksgiving morning, I discovered 6 inches of new snow on my driveway. Friday morning the low temperature was minus 3 degrees Fahrenheit. The high temperature today was 22 degrees Fahrenheit.

I hate winter.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 11-29-2015, 04:07 PM   #9
Jay In Milpitas   Jay In Milpitas is offline
 
Jay In Milpitas's Avatar
 
Join Date: Jul 2015
Location: Milpitas, CA. USA
Posts: 775
Zonal cold.

Quote:
Originally Posted by SpudRider View Post
Cold is a relative term. When I awakened Thanksgiving morning, I discovered 6 inches of new snow on my driveway. Friday morning the low temperature was minus 3 degrees Fahrenheit. The high temperature today was 22 degrees Fahrenheit.

I hate winter.
I'm referring to the area above a man's knees and below his navel, the bits that sag in heat and contract to tuck neatly away in a chill breeze.


 
Reply With Quote
Old 11-29-2015, 11:12 PM   #10
RX3James   RX3James is offline
 
RX3James's Avatar
 
Join Date: Oct 2015
Posts: 35
the stock seat....... in my opinion.. it's brutal! I put in 92 miles today on the RX3. I had a great time riding through the twisties and canyons and the Pacific Coast Highway.. I would've put in 200 miles today if my butt would've been up to it... I have the nice sheep skin gel seat cushion that I bought from CSC.. which helped some i'm sure. But honestly the only reason I headed back to the house as early as I did was because my hind end was aching! I see an after market seat in my very very near future!


 
Reply With Quote
Old 11-29-2015, 11:38 PM   #11
rjmorel   rjmorel is offline
 
rjmorel's Avatar
 
Join Date: May 2007
Location: Warshington
Posts: 928
I've ridden many long, hot days on my RX3 stock seat. It seems that just like a 10 spd bicycle seat your butt needs to "adapt and conquer". And the seat needs to break in also to fit your behind and form to your tush. Every bike I've owned I read terrible things about the stock seats and yes to begin with maybe they are "not the most comfortable" but given time I've found my seat and motorcycles seat will become "one with the universe" .Your behind may very. And I'm sure aftermarket seats can be an improvement, I just like to give a stock seat several thousand miles to break in before looking for a replacement . rj
__________________
Live Zong, and Prosper


 
Reply With Quote
Old 11-30-2015, 12:13 AM   #12
RX3James   RX3James is offline
 
RX3James's Avatar
 
Join Date: Oct 2015
Posts: 35
That might very well be true... I only have 1100 miles on my RX3.. I'll wait it out another 900 or so before I commit to a new seat.... It makes me wonder how the guys did on the Western Americas tour... Today as I was riding home.. knowing I was 30 miles from the house I kept having the thought over and over... how did they do over 300 miles a day? I'm not 100% sure my butt could handle that...


Quote:
Originally Posted by rjmorel View Post
I've ridden many long, hot days on my RX3 stock seat. It seems that just like a 10 spd bicycle seat your butt needs to "adapt and conquer". And the seat needs to break in also to fit your behind and form to your tush. Every bike I've owned I read terrible things about the stock seats and yes to begin with maybe they are "not the most comfortable" but given time I've found my seat and motorcycles seat will become "one with the universe" .Your behind may very. And I'm sure aftermarket seats can be an improvement, I just like to give a stock seat several thousand miles to break in before looking for a replacement . rj


 
Reply With Quote
Old 11-29-2015, 02:45 AM   #13
detours   detours is offline
 
detours's Avatar
 
Join Date: Sep 2014
Location: Arvada, CO
Posts: 1,004
Hi and welcome! I'm good for about 2 hours on the stock seat. After a break for lunch and 2 more hours riding home, I'm ready to stay off the saddle for the rest of the day.

Then I bought the short seat from CSC and it's a lot more comfortable. Now I can easily last 3-4 hours with short breaks for gas or taking pictures. For anyone with an inseam longer than my 30", I would recommend CSC's tall seat.
__________________
Red 5 standing by!

2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery
2014 Ural Patrol


 
Reply With Quote
Old 11-29-2015, 02:55 AM   #14
justinope   justinope is offline
 
Join Date: Nov 2015
Posts: 19
Quote:
Originally Posted by detours View Post
Hi and welcome! I'm good for about 2 hours on the stock seat. After a break for lunch and 2 more hours riding home, I'm ready to stay off the saddle for the rest of the day.

Then I bought the short seat from CSC and it's a lot more comfortable. Now I can easily last 3-4 hours with short breaks for gas or taking pictures. For anyone with an inseam longer than my 30", I would recommend CSC's tall seat.
oh ok, which seat is the short seat on the website?


 
Reply With Quote
Old 11-29-2015, 03:30 AM   #15
RedHawk47   RedHawk47 is offline
 
RedHawk47's Avatar
 
Join Date: Oct 2015
Location: Berthoud, CO
Posts: 205
BTW, I was told that the aftermarket seats that CSC sells are by Seat Concepts, not Saddleman.
Seat Concepts gets lots of rave reviews on ADVRider.
I got the tall seat because I like more seat to foot peg room and I'm used to high saddles - well, not KTM height.
I only have 200 miles on the bike so far, but I'm liking the bike and the saddle.

Dan


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.