Linhai 260cc 4X4

faroe · 08-24-2023, 07:08 AM

I got a Linhai 260cc 4x4. when i try to start it nothing happens! After looking at the wiring, I found that there are some loose wires. can someone tell me what diss is (1 and 2) and where these lines (3) should be connected

Thumper · 08-24-2023, 09:46 PM

One of them might be the CDI unit. The other one maybe a turn signal clicker? Trace the lines. Anything from the sender on the stator, which should come out of the case on the left side between the stator and sprocket cover (under the sprocket cover). That unit will be the CDI. Output might go directly to the coil.

faroe · 08-25-2023, 05:33 AM

The CDI is located in the front.

**JerryHawk250** · 08-25-2023, 07:56 AM

#3 is probably a ground.

dugndeep · 08-26-2023, 10:56 AM

On my new 300cc 4x4, number 2 is the back-up alarm.

dugndeep · 08-26-2023, 10:57 AM

Number 1 is the ,I think,reverse limiter,sorta like a rev limiter.

dugndeep · 08-26-2023, 11:00 AM

32003 BATTERY CABLE POSITIVE 1 LH260ATV.19.2a-1, 9. 32038 REVERSE GEAR WARNING（FOR 4WD） 1 4AL-82600-00, 10. 22002a REVERSE SPEED LIMITER （ FOR

dugndeep · 08-26-2023, 11:02 AM

I've unhooked number 2 on mine,like I said before,I don't need this end of the county to know I'm backing up,lol
the thing is pretty loud,be deer hunting and trying to be quiet and turn the key on and the atv be in reverse,BEEP,BEEP,BEEP

dugndeep · 08-26-2023, 11:05 AM

Does it have a winch?Maybe the bare black wire is a winch wire,on mine I had an extra black & red wire I had to attach to the battery along with the negative & positive battery cables.

08-24-2023, 07:08 AM	#1
faroe Join Date: Aug 2023 Posts: 2	Linhai 260cc 4X4 I got a Linhai 260cc 4x4. when i try to start it nothing happens! After looking at the wiring, I found that there are some loose wires. can someone tell me what diss is (1 and 2) and where these lines (3) should be connected Attached Thumbnails
	0

08-24-2023, 09:46 PM	#2
Thumper Join Date: Feb 2021 Location: Kansas City Posts: 2,237	One of them might be the CDI unit. The other one maybe a turn signal clicker? Trace the lines. Anything from the sender on the stator, which should come out of the case on the left side between the stator and sprocket cover (under the sprocket cover). That unit will be the CDI. Output might go directly to the coil. __________________ -2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it
	0

08-25-2023, 07:56 AM	#4
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,552	#3 is probably a ground. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

08-25-2023, 05:33 AM	#3
faroe Join Date: Aug 2023 Posts: 2	The CDI is located in the front.
	0

08-26-2023, 10:56 AM	#5
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 429	On my new 300cc 4x4, number 2 is the back-up alarm.
	0

08-26-2023, 10:57 AM	#6
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 429	Number 1 is the ,I think,reverse limiter,sorta like a rev limiter.
	0

08-26-2023, 11:00 AM	#7
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 429	32003 BATTERY CABLE POSITIVE 1 LH260ATV.19.2a-1, 9. 32038 REVERSE GEAR WARNING（FOR 4WD） 1 4AL-82600-00, 10. 22002a REVERSE SPEED LIMITER （ FOR
	0

08-26-2023, 11:02 AM	#8
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 429	I've unhooked number 2 on mine,like I said before,I don't need this end of the county to know I'm backing up,lol the thing is pretty loud,be deer hunting and trying to be quiet and turn the key on and the atv be in reverse,BEEP,BEEP,BEEP
	0

08-26-2023, 11:05 AM	#9
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 429	Does it have a winch?Maybe the bare black wire is a winch wire,on mine I had an extra black & red wire I had to attach to the battery along with the negative & positive battery cables.
	0