2008 Hibird QH-200st wiring harness

55fordlover · 07-30-2019, 06:42 PM

Forum,

Does anybody know where I can find this at? We are having issues with the display and the handlebar switch will not start the atv. You can jump it from the solenoid and it runs fine. Also, where can you find the seat - ebay doesn't have it------- HHHHHEEEELLLLPPPP!!!!!!!

LMSP

**JerryHawk250** · 07-30-2019, 07:49 PM

Not sure where to get wire harness. Check all safety switches. Both hand brake and foot brake. Some will have a safety switch for neutral too.

Darth Racer · 07-31-2019, 05:52 PM

I would try and see if you can clean out the switch .... I had the same issue on my TaoTao Rhino.... cleaned it out with a small wire brush and soaked it in WD40.... been working fine since.

I bought some replacement foot brake sensors.... they turn to junk too quick... just put a jumper on the connector and called it done. Got tired of switching them out every couple of months.

For the seat you might be able to find a comparable TaoTao model that would be an exact fit... seems all these Chinese atv's for the most part pretty much use the same parts.

07-30-2019, 06:42 PM	#1
55fordlover Join Date: Jul 2019 Location: leesville, la Posts: 2	2008 Hibird QH-200st wiring harness Forum, Does anybody know where I can find this at? We are having issues with the display and the handlebar switch will not start the atv. You can jump it from the solenoid and it runs fine. Also, where can you find the seat - ebay doesn't have it------- HHHHHEEEELLLLPPPP!!!!!!! LMSP
	0

07-30-2019, 07:49 PM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,574	Not sure where to get wire harness. Check all safety switches. Both hand brake and foot brake. Some will have a safety switch for neutral too. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

07-31-2019, 05:52 PM	#3
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	I would try and see if you can clean out the switch .... I had the same issue on my TaoTao Rhino.... cleaned it out with a small wire brush and soaked it in WD40.... been working fine since. I bought some replacement foot brake sensors.... they turn to junk too quick... just put a jumper on the connector and called it done. Got tired of switching them out every couple of months. For the seat you might be able to find a comparable TaoTao model that would be an exact fit... seems all these Chinese atv's for the most part pretty much use the same parts.
	0