Ouestion about valve adjustment

[AZRider]

Originally Posted by rd1959

Thanks for the replies Huck 369, franque, and jbfla but I've got bigger problems now. While removing the bolts for the exh. valve cover I rounded off one of the heads. Naturally it was the last one and the toughest to get to. Now I have to figure out how to get it out. It's the lower bolt on the left side (when sitting on the bike). Any suggestions?
BTW, I do have an RX3.

If you have a 12 point socket, try that first. Alternatively, go a size smaller socket and with a long extension, hammer the socket onto the rounded bolt head. The bolts are relatively soft.