11-20-2020, 06:53 PM
|
#1 |
|
Join Date: Oct 2020
Posts: 130
|
What IMS shifter fits a 2021 TBR7?
I know the IMS 312223 flightline folding shift lever does not fit.
Which one fits a 2021 TBR7? A quality that will hold up would be great. IMS looks good. |
|
|
11-20-2020, 07:53 PM
|
#2 | |
Join Date: Jan 2017
Location: Arizona
Posts: 463
|
Quote:
https://www.amazon.com/dp/B000UKO37Q...SIN=B000UKO37Q https://radpaul.weebly.com/brozz-and-hawk-250.html |
|
|
|
|
11-20-2020, 08:56 PM
|
#3 |
|
Join Date: Oct 2020
Posts: 130
|
The spline fits but bend on arm is too far inward blocked by the engine casing.
|
|
|
|
11-21-2020, 09:48 AM
|
#4 | |
|
Join Date: Aug 2013
Location: Goodyear, Arizona
Posts: 407
|
Quote:
__________________
2020 Tao TBR7 9.3:1 PnP head CRF230F exhaust 4 degree advance key 290 degree cam Nibbi PE30 and cone filter Front fork brace |
|
|
|
|
11-21-2020, 10:02 AM
|
#5 |
|
Join Date: Oct 2020
Posts: 130
|
Funny, that is exactly what I did to the stock one after some trail riding to get it back to position.
Was looking for suggestions on which one people purchase that is an exact fit. |
|
|
|
11-23-2020, 02:05 PM
|
#6 |
|
Join Date: Oct 2020
Posts: 130
|
I would up just bending it to fit in the end for now.
Attached are the pictures of the factory TBR7 shifter after I bent it back into place and IMS bent into position too. https://postimg.cc/gallery/cfCQpGV The IMS is definitely thicker. Also, the stock shifter has a long shaft with a bolt that catches in a groove, where the IMS just pressure tightens on the end of the shaft. Anybody have a link for a shifter that fits without bending it and has the proper shaft fit? |
|
|
|
|
|
 |
|
|
Linear Mode
