Replacing gaskets

[hect75]

Originally Posted by SpudRider

Personally, I would not drill the carburetor jets. Mikuni main jets are very inexpensive, if purchased from the following vendor.

https://www.rockymountainatvmc.com/p...uni%20n102/221



You can learn more about carburetor jets for you Zong by reading the following threads.

http://www.chinariders.net/showthread.php?t=6501
http://www.chinariders.net/showthread.php?t=6528

I found a mainjet similar to the picture above, the brand is honda No. 133 and 138 but not sure if the diameter hole equals to 1.33 and 1.38 mm. Acording to some comments from motrcycle forums 132 = 1.32 mm (mine was 132 and now is 1.58 mm). It costs about $9 dlls but not sure if they will help to solve the white plug.