Xmotos 250 from POLAND - Page 3

tokarPL · 09-17-2014, 03:27 AM

In my Ares a lot of forests and climbs.
example Climb https://maps.google.pl/maps?ll=52.87...lassic&dg=ntvb
But only on sunday i will to gry to go there

Weldangrind · 09-17-2014, 11:27 AM

Cool! Please take pictures.

SpudRider · 09-17-2014, 12:45 PM

Quote:

Originally Posted by tokarPL

Yes , Its my work..

Good? I made this for 3hours :P

That's a nice stand; you do good work.

SpudRider · 09-17-2014, 12:46 PM

Please do take some photographs on your Sunday ride. We love viewing photographs from around the world.

tokarPL · 09-17-2014, 04:04 PM

Ok. Photos and maybe video on youtube ...Big maybe because my phone is bad (5mpix)

tokarPL · 09-28-2014, 10:28 AM

Hi :(

yesterday , in engine head Valve broke off (side carb) :(((

I have valve in my garage , i think thar repair it

Weldangrind · 09-28-2014, 12:34 PM

I'm not sure what you are saying. Please show us pictures.

tokarPL · 10-09-2014, 03:31 PM

Hey. I could not add pictures through my phone nokia lumia (f * ck windows) ..

We Xmotos has been fixed. New valves ..

Channels in head were enlarged to the max .. Effect? + power and i love this sound .. Similar to crf idle

Weldangrind · 10-10-2014, 11:12 AM

I hope you can add pics or video later.

tokarPL · 11-25-2014, 02:15 PM

HI HI HI !

Im rebuild my cylinder head with new valves but when training new valves were destroyed .... again ..
I gave head to regenerate

I started my new project..
Motorcycle lift at home , will drive 2000lbs winch for quads

This lift is 100% my project

Soon I will show the course of the entire building

any suggestions? Questions? opinions?

http://s3.ifotos.pl/img/108078157_whrqpep.jpg

Weldangrind · 11-25-2014, 09:59 PM

I'm looking forward to following your project.

SpudRider · 11-25-2014, 10:05 PM

X2.

zingshoen · 11-28-2014, 08:25 AM

that looks like it is going to be a serious mc lift!

tokarPL · 12-11-2014, 01:38 PM

Hi, I'm working on a project inner rotor adapter kit for this 125cc - 250cc >> (maybe first in the world) only student to design in 3D, what do you think?

and...

i am working on the lift, finished at 70%

SpudRider · 12-11-2014, 03:16 PM

Nice work; that's impressive.

09-17-2014, 11:27 AM	#32
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Cool! Please take pictures. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

09-17-2014, 12:46 PM	#34
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Please do take some photographs on your Sunday ride. We love viewing photographs from around the world. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

09-28-2014, 12:34 PM	#37
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm not sure what you are saying. Please show us pictures. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

10-10-2014, 11:12 AM	#39
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I hope you can add pics or video later. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-25-2014, 09:59 PM	#41
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'm looking forward to following your project. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

09-17-2014, 03:27 AM	#31
tokarPL Join Date: Sep 2014 Posts: 35	In my Ares a lot of forests and climbs. example Climb https://maps.google.pl/maps?ll=52.87...lassic&dg=ntvb But only on sunday i will to gry to go there
	0

09-17-2014, 04:04 PM	#35
tokarPL Join Date: Sep 2014 Posts: 35	Ok. Photos and maybe video on youtube ...Big maybe because my phone is bad (5mpix)
	0

09-28-2014, 10:28 AM	#36
tokarPL Join Date: Sep 2014 Posts: 35	Hi :( yesterday , in engine head Valve broke off (side carb) :((( I have valve in my garage , i think thar repair it
	0

10-09-2014, 03:31 PM	#38
tokarPL Join Date: Sep 2014 Posts: 35	Hey. I could not add pictures through my phone nokia lumia (f * ck windows) .. We Xmotos has been fixed. New valves .. Channels in head were enlarged to the max .. Effect? + power and i love this sound .. Similar to crf idle
	0

11-25-2014, 02:15 PM	#40
tokarPL Join Date: Sep 2014 Posts: 35	HI HI HI ! Im rebuild my cylinder head with new valves but when training new valves were destroyed .... again .. I gave head to regenerate I started my new project.. Motorcycle lift at home , will drive 2000lbs winch for quads This lift is 100% my project Soon I will show the course of the entire building any suggestions? Questions? opinions? http://s3.ifotos.pl/img/108078157_whrqpep.jpg
	0

11-25-2014, 10:05 PM	#42
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	X2. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-28-2014, 08:25 AM	#43
zingshoen Join Date: Jun 2009 Location: Brisbane, Queensland, Australia Posts: 648	that looks like it is going to be a serious mc lift! __________________ 1971 Garelli Gulp 50cc with open ports and 16 mm Bing Carbie + 1980 Honda XL 223 ZS + 2007 Zongshen LZX200G + DR400SM
	0

12-11-2014, 01:38 PM	#44
tokarPL Join Date: Sep 2014 Posts: 35	Hi, I'm working on a project inner rotor adapter kit for this 125cc - 250cc >> (maybe first in the world) only student to design in 3D, what do you think? and... i am working on the lift, finished at 70%
	0

12-11-2014, 03:16 PM	#45
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Nice work; that's impressive. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0