Gio x31 2010 piston/bore size? - Page 4

Weldangrind · 07-29-2013, 01:49 AM

When you say the plug that goes to the coil is good, do you mean that there is definitely power to the coil?

gagab1 · 07-29-2013, 02:47 PM

yes... i try with 3 different ingnition coil
. I think i have a ground problem... but i test all the ground connection with a multimeter...

gagab1 · 07-30-2013, 10:37 AM

So i figured out the problem i had a bad connection on the wiring... but loll i have 2 coil one not work at all and the other make 1 spark at 10 flywheel loop.

this is shwit

07-29-2013, 01:49 AM	#1
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	When you say the plug that goes to the coil is good, do you mean that there is definitely power to the coil? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-29-2013, 02:47 PM	#2
gagab1 Join Date: Jun 2013 Location: Rivière-du-Loup, Quebec, Canada Posts: 28	yes... i try with 3 different ingnition coil . I think i have a ground problem... but i test all the ground connection with a multimeter...
	0

07-30-2013, 10:37 AM	#3
gagab1 Join Date: Jun 2013 Location: Rivière-du-Loup, Quebec, Canada Posts: 28	So i figured out the problem i had a bad connection on the wiring... but loll i have 2 coil one not work at all and the other make 1 spark at 10 flywheel loop. this is shwit
	0