Fuse Size ? Can't read it even with magnifying glass

Rule308 · 09-12-2015, 07:31 PM

My fast blow, cylinder shaped, fuse can not be read for the size it is. Anyone know what size it is on the Rhino 250 or ATA-250D? Also looked at the spare in the holder but it too is barely stamped to make it unreadable.

Are these fuses sized too small? Anyone blowing them?

humanbeing · 09-12-2015, 08:22 PM

15A (size: 6*30) maybe the answer, it's the standard 1 in modern (old shit is 10A) Chonda.
Use the old trick: Pencil on paper may get the answer

Mudflap · 09-13-2015, 05:56 AM

I replaced the stock fuse holder in my ATA250D with a blade type and tried a 5 amp fuse... not enough, it occasionally blew. Put a 10 amp in and it hasn't blown. 10A or 15A should be fine.

Weldangrind · 09-13-2015, 05:04 PM

15 is all I've ever seen on the junk I've had.

09-12-2015, 07:31 PM	#1
Rule308 Join Date: Aug 2015 Location: Houston but will ride in Llano Texas Posts: 52	Fuse Size ? Can't read it even with magnifying glass My fast blow, cylinder shaped, fuse can not be read for the size it is. Anyone know what size it is on the Rhino 250 or ATA-250D? Also looked at the spare in the holder but it too is barely stamped to make it unreadable. Are these fuses sized too small? Anyone blowing them?
	0

09-12-2015, 08:22 PM	#2
humanbeing Join Date: Mar 2008 Posts: 2,436	15A (size: 630) maybe the answer, it's the standard 1 in modern (old shit is 10A) Chonda. Use the old trick: Pencil on paper may get the answer __________________ Last edited by humanbeing; 09-13-2015 at 01:49 AM.*
	0

09-13-2015, 05:04 PM	#4
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	15 is all I've ever seen on the junk I've had. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

09-13-2015, 05:56 AM	#3
Mudflap Join Date: Sep 2014 Posts: 1,870	I replaced the stock fuse holder in my ATA250D with a blade type and tried a 5 amp fuse... not enough, it occasionally blew. Put a 10 amp in and it hasn't blown. 10A or 15A should be fine.
	0