06-29-2021, 11:34 AM | #1 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
2020 hawk deluxe
Runs good but sometimes when cold it hesitates and when it’s warm sitting at a idle and when I hit the throttle it cuts off , I did valves did not solve the problem, might do them again
Last edited by weiser23; 06-29-2021 at 10:03 PM. |
|
06-30-2021, 01:06 PM | #2 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
Any ideas what could be causing this, I thought efi would solve the hesitations and stalling issues
|
|
06-30-2021, 01:55 PM | #3 |
Join Date: May 2021
Posts: 272
|
How many miles do you have on it? Mine kinda does the same thing and only 20 miles.
|
|
06-30-2021, 02:41 PM | #4 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,553
|
It might takes some miles for the ECU to learn. Give it some time.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
06-30-2021, 10:23 PM | #5 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
100 miles
|
|
06-30-2021, 10:41 PM | #6 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
I tightened back wheel to 69 foot lb and wheel seems to have drag on it does yours have drag
|
|
07-01-2021, 10:43 AM | #7 |
Join Date: May 2021
Posts: 272
|
Hi, no just checked this morning. My torque on the bolt is 65 and I don't think 69 would make a drag. How's your chain tension?
|
|
07-01-2021, 11:34 AM | #8 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
Chain is good ,,,from what I saw it is supposed to be 68.59 I rounded to 69 foot lbs
|
|
07-01-2021, 11:46 AM | #9 |
Join Date: May 2021
Posts: 272
|
My manual says torque 65 ft lbs on rear axle 45 on front.
|
|
07-01-2021, 05:43 PM | #10 |
Join Date: Jan 2011
Location: mechanicsburg pa
Posts: 166
|
You are right I
Got the information from this forum but it really didn’t make a difference |
|
|
|
|
|