No electricity - HSUN 400 ATV year 2008 - copy of Yamaha Raptor 350

Plutso · 05-18-2024, 05:33 AM

Fault reason in my previous post https://www.chinariders.net/showthread.php?t=34037 was that cdi was damaged. After installing new cdi, the ATV worked as brand new

But unfortunately the fun was very short. After first ride (ca 2 hours) the electricity disappeared, as you can see here: https://photos.app.goo.gl/Ds2RG4sQUHtoB3zf7

I found one a little bit damaged cable, but I'm not sure, that it is the main reason.
Picture of cable: https://photos.app.goo.gl/xF4oxS8ez8m9bST56

Also I found, that ATV has two fuse socket, but one was empty. The one in use has fuse 30A. I put same (30A) brand new fuse to the other socket also, but no results, no any electricity.
Pictures of fuses and sockets are here: https://photos.app.goo.gl/8GfZaMrsQbzDf6jp9

Does anyone have any ideas what could be wrong?

dugndeep · 05-18-2024, 08:51 AM

I'm no mechanic so all I can say is go back and check your repair to check for loose wire or connections.

Plutso · 05-19-2024, 02:59 PM

Yes, I checked again and found that ignition interlock was damaged. I temporarily replaced it with a table lamp switch

, until the right ignition lock arrives.

05-18-2024, 05:33 AM	#1
Plutso Join Date: Mar 2024 Posts: 5	No electricity - HSUN 400 ATV year 2008 - copy of Yamaha Raptor 350 Fault reason in my previous post https://www.chinariders.net/showthread.php?t=34037 was that cdi was damaged. After installing new cdi, the ATV worked as brand new But unfortunately the fun was very short. After first ride (ca 2 hours) the electricity disappeared, as you can see here: https://photos.app.goo.gl/Ds2RG4sQUHtoB3zf7 I found one a little bit damaged cable, but I'm not sure, that it is the main reason. Picture of cable: https://photos.app.goo.gl/xF4oxS8ez8m9bST56 Also I found, that ATV has two fuse socket, but one was empty. The one in use has fuse 30A. I put same (30A) brand new fuse to the other socket also, but no results, no any electricity. Pictures of fuses and sockets are here: https://photos.app.goo.gl/8GfZaMrsQbzDf6jp9 Does anyone have any ideas what could be wrong?
	0

05-18-2024, 08:51 AM	#2
dugndeep Join Date: Jul 2019 Location: Lancaster,Ky Posts: 431	I'm no mechanic so all I can say is go back and check your repair to check for loose wire or connections.
	1

05-19-2024, 02:59 PM	#3
Plutso Join Date: Mar 2024 Posts: 5	Yes, I checked again and found that ignition interlock was damaged. I temporarily replaced it with a table lamp switch , until the right ignition lock arrives.
	0