Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX3
Closed Thread
 
Thread Tools Search this Thread Display Modes
Old 11-18-2015, 02:43 PM   #1
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Confirmed Torque Specifications: Zongshen RX3

This thread contains a list of confirmed torque specifications for critical bolts of the Zongshen RX3 motorcycle. This thread is closed. Please contribute your confirmed torque specifications at the following thread. Thank you.

http://www.chinariders.net/showthread.php?t=15535

Lower Shock Linkage

All bolts for the rocker/knuckle/arm, except the lower shock bolt: 38 foot-pounds
All bolts for the link/dogbone: 38 foot-pounds
Lower Shock Bolt: 33 foot-pounds

Upper Shock Bolt

33 foot-pounds

Swingarm Bolt

54 foot-pounds
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894



Last edited by SpudRider; 11-26-2016 at 05:12 AM.
 
Old 11-18-2015, 07:15 PM   #2
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Rear Axle Bolt

50 foot-pounds
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Old 11-19-2015, 03:19 AM   #3
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Torque Specifications Taken from the AJP PR5 Owner's Manual

Oil Drain Plug, Oil Screen Plugs, Oil Filter Cover

Oil Drain Plug: 18.5 foot pounds (25 Nm)
Oil Screen Plugs: 18.5 foot pounds (25 Nm)
Oil Filter Cover Bolts: 6 foot pounds (8 Nm)

Cylinder Head

Cylinder Bolts: 28 foot pounds (38 Nm)

Triple Head Clamps

Upper Triple Clamp: 15 foot pounds (20 Nm)
Lower Triple Clamp: 9 foot pounds (12 Nm)
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894



Last edited by SpudRider; 11-19-2015 at 04:10 AM.
 
Old 11-19-2015, 03:46 AM   #4
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual

Front Brake Caliper Bolt: 18 foot pounds (25 Nm)
Engine Mount Bolts: 26 foot pounds (36 Nm)
Crankcase Bolt: 7 foot-pounds (10 Nm)

General Torque Specifications

M4 Nuts & Bolts: 26 inch-pounds (3 Nm)
M5 Nuts & Bolts: 53 inch-pounds (6 Nm)
M6 Nuts & Bolts: 10 foot-pounds (7 Nm)
M8 Nuts & Bolts: 18 foot-pounds (25 Nm)
M10 Nuts & Bolts: 33 foot-pounds (45 Nm)
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Old 11-19-2015, 04:04 AM   #5
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Torque Specifications Taken from the Gas Gas EC Cami 250 Owner's Manual



Please note, the torques in this diagram are specified in newton-meters. The following link will convert newton-meters to foot-pounds.

http://www.convertunits.com/from/N+m/to/ft+lb
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:50 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.