Just bought a new Rhino 250 and am going to install a 60" snow plow - Page 3

PANDEMIC · 01-23-2019, 09:44 AM

My plow won't be here until tomorrow.

I sure could use it today 5" already still another 4-6" coming. This was done less than an hour ago by hand.

PANDEMIC · 01-23-2019, 10:02 AM

So if you remember I tied in trailer light plug for my ATV. so I picked up a 4 pin trailer light extension wired it to my magnetic strobe light and now have a street legal ATV for city use during a snow emergency. I can drive it within the city as long as it is within 2 miles of your main hub. My uncle is 1 mile from me so now I can rip around here.

Love Snow Loop Holes

Attachment 15535

Weldangrind · 01-23-2019, 12:17 PM

Love the loophole! I'd have a much better time clearing snow with a quad than a shovel.

PANDEMIC · 01-23-2019, 05:39 PM

So looked into the rules light has to be elevated. So back to the drawing board. I still had angle iron and square tube from the crate the ATV came in. So here is a quick slide show of the light post build. 3 bolts to hold it on and the bolts are already on the ATV. I still have to clean up some welds and paint it but almost done.
Attachment 15540
Attachment 15538
Attachment 15539
Attachment 15541
Attachment 15542

PANDEMIC · 01-23-2019, 05:42 PM

Attachment 15543
Attachment 15544
Attachment 15545
Attachment 15546
Attachment 15547

**JerryHawk250** · 01-23-2019, 05:48 PM

Looks good!

PANDEMIC · 01-23-2019, 05:53 PM

Started the tack welds without a face mask so I was closing my eyes and looking away trying to weld. That doesn't work it so the main pole is not square to the frame. Then I called my uncle and had him bring a mask. lol

PANDEMIC · 01-23-2019, 06:05 PM

I plan to add a blinker kit to it still.

**JerryHawk250** · 01-23-2019, 07:22 PM

Quote:

Originally Posted by PANDEMIC

Started the tack welds without a face mask so I was closing my eyes and looking away trying to weld. That doesn't work it so the main pole is not square to the frame. Then I called my uncle and had him bring a mask. lol

lol, yeah I've done that before too.

PANDEMIC · 01-23-2019, 07:54 PM

Its in the paint booth lol
Attachment 15549

PANDEMIC · 01-23-2019, 08:02 PM

I need to find some tire chains without the vbar its f*$king up my driveway bad. Opps hope the wife dont get pissed.

Darth Racer · 01-23-2019, 08:37 PM

Thanks for the heads up on the instructions and the video. Love the paint booth. I usually use the clothes line..... LOL wife loves it when I do that.

What's a "V" Bar?

PANDEMIC · 01-23-2019, 09:33 PM

see how they weld a v bar onto every link of the chain that touches the ground. it grips like crazy but also scratches like crazy. These are great on ice though

PANDEMIC · 01-23-2019, 09:36 PM

I need some like this so it won't scratch as bad.

Darth Racer · 01-24-2019, 05:07 AM

Ahhh okay.... thought it was some sort of part that mounts the blade differently.

01-23-2019, 09:44 AM	#31
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	My plow won't be here until tomorrow. I sure could use it today 5" already still another 4-6" coming. This was done less than an hour ago by hand. Attachment 15532 Attachment 15533 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	1

01-23-2019, 10:02 AM	#32
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	So if you remember I tied in trailer light plug for my ATV. so I picked up a 4 pin trailer light extension wired it to my magnetic strobe light and now have a street legal ATV for city use during a snow emergency. I can drive it within the city as long as it is within 2 miles of your main hub. My uncle is 1 mile from me so now I can rip around here. Love Snow Loop Holes Attachment 15535 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	3

01-23-2019, 12:17 PM	#33
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Love the loophole! I'd have a much better time clearing snow with a quad than a shovel. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1

01-23-2019, 05:39 PM	#34
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	So looked into the rules light has to be elevated. So back to the drawing board. I still had angle iron and square tube from the crate the ATV came in. So here is a quick slide show of the light post build. 3 bolts to hold it on and the bolts are already on the ATV. I still have to clean up some welds and paint it but almost done. Attachment 15540 Attachment 15538 Attachment 15539 Attachment 15541 Attachment 15542 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	2

01-23-2019, 05:42 PM	#35
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Attachment 15543 Attachment 15544 Attachment 15545 Attachment 15546 Attachment 15547 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	2

01-23-2019, 05:48 PM	#36
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,553	Looks good! __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

01-23-2019, 05:53 PM	#37
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Started the tack welds without a face mask so I was closing my eyes and looking away trying to weld. That doesn't work it so the main pole is not square to the frame. Then I called my uncle and had him bring a mask. lol
	2

01-23-2019, 06:05 PM	#38
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	I plan to add a blinker kit to it still.
	0

01-23-2019, 07:54 PM	#40
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	Its in the paint booth lol Attachment 15549 Last edited by PANDEMIC; 02-01-2019 at 09:34 AM.
	3

01-23-2019, 08:02 PM	#41
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	I need to find some tire chains without the vbar its f$king up my driveway bad. Opps hope the wife dont get pissed. Last edited by Weldangrind; 01-24-2019 at 11:46 AM.*
	0

01-23-2019, 08:37 PM	#42
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Thanks for the heads up on the instructions and the video. Love the paint booth. I usually use the clothes line..... LOL wife loves it when I do that. What's a "V" Bar?
	0

01-23-2019, 09:33 PM	#43
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	see how they weld a v bar onto every link of the chain that touches the ground. it grips like crazy but also scratches like crazy. These are great on ice though
	0

01-23-2019, 09:36 PM	#44
PANDEMIC Join Date: Feb 2018 Location: WI Posts: 213	I need some like this so it won't scratch as bad.
	0

01-24-2019, 05:07 AM	#45
Darth Racer Join Date: Apr 2016 Location: MD Posts: 558	Ahhh okay.... thought it was some sort of part that mounts the blade differently.
	0