Haosen (Hawks etc.): Ask me anything

[Greenmagician2020]

I have a 250 RPS magician 167 fmm stamped on the block. Carbureted, I purchased it knowing it needed work stator was missing that's what I'm on right now I purchased one but the colors of the wires are different than the factory harness.
Stator to harness
Blue/white
Yellow
Pink
Red/blk
Green/white
This has a 6 wire cdi.
Harness to stator (4pin)
2 solid yellows
Blue/white
Solid green.
Obviously the blue and white go together I would assume but I'm getting no spark. I got two double check all my saf ety sensors. And this is not the gear indicator (6) pin. But it does have a strong rollover any help would be greatly appreciated thank you guys