11-25-2013, 11:49 PM
|
#1 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
|
'Chained' up...
Was attempting to ride home from work in the rain on Friday. Crunch, rip, tear...the now kind of familiar chain ripping off the bike sound, taking a few pieces of the bike with it.
Had to buy a new chain ( again) and installed the original 56 tooth sprocket since the aftermarket 40 tooth one was missing a few teeth and the rest were sharpened to a point (this was the 3rd chain to go out with this sprocket on). If someone on the UK Ebay will sell me a 48 tooth sprocket for the Derbi Senda 125r that will be the easiest and most cost effective way, or else I will cough up the $55 for another custom one from Rebel Gears since the 40 t one they made fit perfectly, and they still have the dimensions for it. I am leaning for a 44 or 46 t if I have to go custom, this time. My question is...Spud; you linked a source for an O-ring chain which I think would be better for me. Do you still have that link?
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
|
|
11-25-2013, 11:54 PM
|
#2 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I highly recommend the KMC 428UO drive chain.
 You can purchase it from OEMCycle.com for $36.40.http://www.oemcycle.com/Item/product/900269983 You can also find this drive chain for sale on eBay. 
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|
 |
|
|
Linear Mode
